-
×
3M 01326, PSA Cloth Disc 348D, P240 X-weight, 3 in x NH, Die 300V, 7000045069
200 × $0.95 -
×
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
1000 × $0.67 -
×
3M 77559, Cubitron II Hookit Cloth Disc 784F, 77559, 36+ to 120+, 5 in x NH, Die 500X, 7100232738
300 × $6.03 -
×
3M 77512, Cloth Belt 777F, 60 YF-weight, 1 in x 42 in, Film-lok, Single-flex, 7010307736, 200 per case
200 × $5.06 -
×
3M™ 72787, Calibration Kit 529-04-48, Large, 7000052154, 1 EA/Case
1 × $2,225.47 -
×
Dynabrade 95821 Dynabrade Air Lube 10W/NR, 4oz Bottle
1 × $18.00 -
×
3M™ 72016, Remote Alarm & Strobe 529-05-20, Audible, 7000131708, 1 EA/Case
1 × $502.78 -
×
3M 05519, Sanding Block, Rubber, 2-3/4 in x 5 in, 7000000587
10 × $18.37 -
×
3M 11412, Roloc Disc 361F, 36 YF-weight, TR, 1 in, Die R100N, 7000045092
500 × $0.60 -
×
3M 22404, Roloc Disc 361F, 80 YF-weight, TR, 3 in, Die R300V, 7000045100
200 × $1.33 -
×
3M 22408, Roloc Disc 361F, P100 YF-weight, TR, 1-1/2 in, Die R150S, 7000045101
500 × $0.67 -
×
3M 31663, Cubitron II Net Disc 80+/180+/320+, includes 6 in discs and sheets, Job Pack, 7100251881, 100 Packs/Case
100 × $12.97 -
×
Dynabrade 95544 Gear Grease, 2.5oz. Tube
1 × $11.43 -
×
3M 62612, Scotch-Weld Threadlocker TL71, Red, 10 mL Bottle, 7100039197, 10/case
10 × $13.32 -
×
3M 29858, Sanding Screen, 80 grit, 12 in x 18 in, 7100161088
20 × $6.77 -
×
Standard Abrasives 41460, Aluminum Oxide Overlap Disc, 715803, 120 Grit, 1 in x 8-32 x 2 Ply, 7100092203
100 × $2.42 -
×
Dynabrade 45209 Sleeve for 48201, 25,000 RPM
1 × $43.44 -
×
3M 16580, Accuspray ONE Spray Gun System with Standard PPS, 7100099202
4 × $337.64 -
×
3M 05206, Marine Adhesive Sealant 5200, White, 1 oz Tube, 7010325697, 12/Case
12 × $9.29 -
×
Dynabrade 96101 Dynabrade Air Lube 10W/NR 24 Per Box
1 × $385.42 -
×
Dynabrade 64350 26" W x 36" L (660 mm W x 914 mm L) Metal Capture Downdraft Station, 230 V (AC)
1 × $18,352.22 -
×
Standard Abrasives 890194, S/C Unitized Wheel, 632, 12 in x 1/4 in x 1-1/4 in, 7010367081
10 × $105.90
3M 06883, Floor Surfacing Rolls, 12 in x 25 yd, 20 Grit Combo, 7010293800
$280.04
Factory Stock, 7-10 Day Leadtime
3M Resinite Floor Surfacing Rolls are for drum sanding machines on commercial and residential jobs. Use for general sanding. Durable mineral on paper or combination backing. Fast cuts, better finish, longer life, time savings.
3M Floor Surfacing Rolls are recommended for general drum sanding. They are especially good for removing gummy finishes. This abrasive cuts fast.
Related products
Non-Woven Discs
Standard Abrasives 882115, A/O Unitized Wheel, 821, 2 in x 1/2 in x 1/4 in, 7010310376
$10.27
