-
×
3M 05519, Sanding Block, Rubber, 2-3/4 in x 5 in, 7000000587
10 × $18.37 -
×
3M 05441, Stikit Hand Block, 2-3/4 in x 7-3/4 in, 7000045765
10 × $34.55 -
×
3M™ 72016, Remote Alarm & Strobe 529-05-20, Audible, 7000131708, 1 EA/Case
1 × $502.78 -
×
Standard Abrasives 78531, Ceramic Pro Type 29 Flap Disc, 645146, 7 in x 7/8 60 Y-weight, 7010310621, 5 per case
10 × $12.78 -
×
3M™ 07012, Supplied Air Hose W-9435-100/07012(AAD), 100 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005375, 1 EA/Case
1 × $435.37 -
×
Dynabrade 10690 Filter/Regulator/Lubricator, FRL40, 1/2" NPTAssy.
1 × $388.51 -
×
3M 11137, Roloc Disc 361F, 50 YF-weight, TR, 1-1/2 in, Die R150S, 7000045094
500 × $0.73 -
×
3M™ 07010, Supplied Air Respirator Hose W-9435-25/07010(AAD), 25 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005374, 1 EA/Case
1 × $175.93
-
×
Dynabrade 40610 Electric Dynafile II Abrasive Belt Tool
1 × $420.00 -
×
Standard Abrasives 78525, Ceramic Pro Type 29 Flap Disc, 645134, 4-1/2 in x 7/8 60 Y-weight, 7010331465
10 × $7.50 -
×
Standard Abrasives 78518, Ceramic Pro Type 27 Flap Disc, 645121, 7 in x 7/8 40 Y-weight, 7010331463
5 × $12.78 -
×
Dynabrade 95842 Dynabrade Air Lube 10W/NR, 1 Pint
1 × $25.78 -
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,245.00 -
×
Dynabrade 64404 36" W x 60" L (914 mm W x 1,524 mm L) Metal Capture Downdraft Table, 230 V (AC), Side Exhaust
1 × $28,988.00 -
×
3M 26312, PPS Series 2.0 Spray Cup System Kit, Midi (13.5 oz, 400 mL),
125 Micron Filter, 7100169346
1 × $103.16 -
×
3M™ 94275, Versaflo™ Gold Coated Tinted Over-Visor with UV/IR Protection M-967N, 70071696879, 1 EA/Case
1 × $192.76 -
×
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
1 × $33.40
3M 04175, Regalite Resin Bond Cloth Roll, 3M761D, 12 in x 25 yd, 100Y grit, 7010401381
$320.39
Factory Stock, 7-10 Day Leadtime
3M Regalite Resin Bond Cloth cuts faster and runs cooler for less burning. Reduces streaking caused by nail strikes, reduces shelling and chatter marks. Lasts significantly longer than other belts.
3M Floor Surfacing Rolls are recommended for general drum sanding. They are especially good for removing gummy finishes. This abrasive cuts fast.
Related products
