-
×
Dynabrade 94821 - 3/8" ID, 10' Long Air Hose Assembly, Female/ Male Fitting Ends Included
1 × $65.58 -
×
Dynabrade 94876 25' Max Flow 5/16" I.D. Air Hose Assembly, Male (1/4") / Male (1/4") Fitting Ends Included
2 × $110.80 -
×
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
200 × $1.74 -
×
Dynabrade 11476 Dynabelter Abrasive Belt Tool, Heavy-Duty
3 × $1,721.00 -
×
3M 26125, PPS Series 2.0 Adapter, Type S29, 8 mm Male, 1.25 mm Thread, 7100135955
1 × $25.96 -
×
Dynabrade 50834 Hose Assembly, 3/4" Dia. 5' Long
1 × $76.68 -
×
Dynabrade 40320 Dynafile II Abrasive Belt Tool
1 × $722.00 -
×
Dynabrade 15420 Dynafile III Abrasive Belt Tool
1 × $1,012.00 -
×
Dynabrade 94853 50' Max Flow 5/16" I.D. Air Hose Assembly, Male (1/4") / Male (1/4") Fitting Ends Included
1 × $191.91 -
×
Dynabrade 94857 12' Max Flow 10mm I.D. Air Hose Assembly, Male (1/4") / Male (1/4") Fitting Ends Included
1 × $103.17 -
×
Dynabrade 11486 Dynabelter Accu-Grinder Abrasive Belt Tool, Heavy-Duty
1 × $2,022.00 -
×
Dynabrade 11475 Dynabelter Abrasive Belt Tool, Standard Duty
2 × $1,520.00 -
×
3M 05520, Sanding Block, Rubber, 2-3/4 in x 8 in, 7000028366
10 × $24.73 -
×
Dynabrade 95843 Dynabrade Air Lube 10W/NR, 1 Gallon
1 × $109.23 -
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,245.00 -
×
3M 28126, Hookit Clean Sanding Disc 900DZ, 5 in 80 J-weight, Die 500LG, 7010290258
250 × $1.44 -
×
Dynabrade 94854 50' Max Flow 5/16" I.D. Air Hose Assembly, Female (1/4") / Male (1/4") Fitting Ends Included
1 × $191.91 -
×
3M 11414, Roloc Disc 361F, P120 XF-weight, TR, 1 in, Die R100N, 7000045104
500 × $0.58 -
×
3M 19771, Utility Cloth Sheet 314D, 9 in x 11 in P100 J-weight, 7000021272
250 × $1.43 -
×
ACS Diamond Cloth Belt, CX1250 3" X 90" 20U
2 × $171.30
3M 04175, Regalite Resin Bond Cloth Roll, 3M761D, 12 in x 25 yd, 100Y grit, 7010401381
$320.39
Factory Stock, 7-10 Day Leadtime
3M Regalite Resin Bond Cloth cuts faster and runs cooler for less burning. Reduces streaking caused by nail strikes, reduces shelling and chatter marks. Lasts significantly longer than other belts.
3M Floor Surfacing Rolls are recommended for general drum sanding. They are especially good for removing gummy finishes. This abrasive cuts fast.
Related products