-
×
Dynabrade 15420 Dynafile III Abrasive Belt Tool
1 × $1,012.00 -
×
3M 26132, PPS Series 2.0 Adapter, Type S37, 5/8 Male, 11 UNC Modified, 7100135949
1 × $27.52 -
×
3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737
240 × $9.21 -
×
Standard Abrasives 712149, Aluminum Oxide Handy Roll, P100 J-weight, 1-1/2 in x 50 yd, 7010295370
1 × $41.26 -
×
3M™ 72010, Replacement Filter Kit 523-01-29, 7000056891, 1 EA/Case
1 × $553.91 -
×
Dynabrade 11475 Dynabelter Abrasive Belt Tool, Standard Duty
1 × $1,520.00 -
×
Standard Abrasives 700743, Cartridge RoII Mandrel, 1/8 in x 3/4 in x 1/8 in x 1 in x 2-3/4 in CM-4, 7010368728
5 × $4.74 -
×
3M 22333, Cloth Belt 577F, 120 YF-weight, 3/4 in x 20-1/2 in, Fabri-lok, Full-flex, 7000119441, 200 per case
200 × $1.83 -
×
3M 30704, Cloth Belt 577F, 120 YF-weight, 2 in x 60 in, Film-lok, Single-flex, 7010292532, 50 per case
50 × $7.19 -
×
3M 26124, PPS Series 2.0 Type H/O Pressure Cup, Large/Standard (28 floz/22 fl oz, 828m/650 mL), 2/Case
2 × $91.41 -
×
Norton 66623325035 - 2" 120 Grit Fine Grade Aluminum Oxide Vortex Rapid Prep Green TR Non-Woven Surface Preparation Disc, 50 Each
50 × $1.70 -
×
Standard Abrasives 710190, Cartridge Roll Mandrel, 2560020, 1/8 in x 1 in x 1/4 in x 1-1/4 in x 2-3/4 in CM-9, 7000121790
5 × $4.58 -
×
3M 94717, Cubitron ll Cloth Belt 947A, 80+ X-weight, 1 in x 30 in, Fabri-lok, Single-flex, 7010294445, 200 per case
200 × $4.11 -
×
Standard Abrasives 713297, Aluminum Oxide Handy Roll, P120 J-weight, 2 in x 50 yd, 7100031623
1 × $52.38 -
×
Dynabrade 95843 Dynabrade Air Lube 10W/NR, 1 Gallon
1 × $109.23 -
×
Dynabrade 95676 1/4" Female Coupler with 1/4" Male Plug Assembly
1 × $31.48 -
×
3M 20967, Portable Utility Cloth Roll 314D, P240 J-weight, 1 in x 20 yd, 7010290604
5 × $17.83 -
×
ACS Diamond Cloth Belt, CX1250 1/2" X 18" 125U
12 × $5.70
3M 04175, Regalite Resin Bond Cloth Roll, 3M761D, 12 in x 25 yd, 100Y grit, 7010401381
$339.61
Factory Stock, 7-10 Day Leadtime
3M Regalite Resin Bond Cloth cuts faster and runs cooler for less burning. Reduces streaking caused by nail strikes, reduces shelling and chatter marks. Lasts significantly longer than other belts.
3M Floor Surfacing Rolls are recommended for general drum sanding. They are especially good for removing gummy finishes. This abrasive cuts fast.
Related products