-
×
3M 05027, Cloth Belt 384F, 240+ XF-weight, 1/2 in x 12 in, Fabri-lok, 7100141448, 200 per case
200 × $0.97 -
×
Dynabrade 91166 1/2" W x 13" L 80 Grit A/O DynaCut Belt, 50/pack
50 × $1.95 -
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
2 × $1,245.00 -
×
3M 05744, Hookit Hand File Board, 2-3/4 in x 16 in, 7000045717
1 × $73.94 -
×
Dynabrade 53270 7" (180 mm) Dia. Right-Angle Disc Sander
2 × $1,585.00 -
×
Dynabrade 95544 Gear Grease, 2.5oz. Tube
1 × $11.43 -
×
Dynabrade 11684 Dynabelter Contact Arm Assembly 4" DIA X 5/8" W., 40 Duro Serrated
1 × $438.51 -
×
Dynabrade 11486 Dynabelter Accu-Grinder Abrasive Belt Tool, Heavy-Duty
1 × $2,022.00 -
×
3M 29836, Sanding Screen, 60 Grit, 18 in x NH, 7100160820
12 × $11.06 -
×
3M 27551, EMI Copper Foil Shielding Tape 1181, 1/2 in x 18 yd (12.70 mm x 16.5m), 7000132182
18 × $39.89 -
×
Dynabrade 51731 .1 hp Straight-Line Pencil Grinder, 60,000 RPM, 1/8" Collet
1 × $634.00 -
×
Dynabrade 11476 Dynabelter Abrasive Belt Tool, Heavy-Duty
1 × $1,721.00 -
×
3M 05520, Sanding Block, Rubber, 2-3/4 in x 8 in, 7000028366
10 × $24.73 -
×
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
200 × $1.39 -
×
Dynabrade 10690 Filter/Regulator/Lubricator, FRL40, 1/2" NPTAssy.
1 × $388.51 -
×
Dynabrade 51301 .5 hp Straight-Line Die Grinder
1 × $453.00 -
×
Dynabrade 96067 Motor Tune-Up Kit
1 × $111.68 -
×
Dynabrade 53533 Cone or Plug Grinder (Triple Extension)
1 × $1,569.00 -
×
Dynabrade 11477 Dynabelter Abrasive Belt Tool, Heavy-Duty
1 × $2,712.00 -
×
Dynabrade 96246 Repair Collar
1 × $52.42 -
×
Dynabrade 95848 Dynabrade Gear Oil
1 × $12.98 -
×
3M 03122, Vinyl Tape 471, Blue, 3 in x 36 yd, 5.2 mil, 7000047464
12 × $63.52 -
×
Dynabrade 61420 Raptor Vac Electric Portable Vacuum System
1 × $1,408.00 -
×
3M 71878, Flexible Diamond Hand File 6210J, Yellow 18, N40, NO 1, 7000082156, 10 per case
1 × $95.83
3M 02534, Floor Surfacing Sheets, 12 in x 18 in, Easy Change, 80 grit, 7010384974
$3.95
Factory Stock, 7-10 Day Leadtime
Hook-it II Floor Surfacing Abrasive Sheets are coated on heavyweight paper. Easy-to-use on rectangular floor sheet sanding machines. Hookit II backing provides positive locking to driving pad.
3M Floor Surfacing Rolls are recommended for general drum sanding. They are especially good for removing gummy finishes. This abrasive cuts fast.
Related products
$25.96