-
×
Norton 63642507156 - 3" X 1/2" X 1/4" Unified Diamond Wheel, 20 Each
20 × $90.00 -
×
3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
500 × $0.67 -
×
3M 14343, Marine Adhesive Sealant 4000 UV, Black, 600 mL Sausage Pack, 7010309931, 12/Case
12 × $25.07 -
×
3M 11000, Roloc Disc 361F, 24 YF-weight, TR, 2 in, Die R200P, 7000028183
200 × $1.25 -
×
3M 19773, Utility Cloth Sheet 314D, 9 in x 11 in P60 X-weight, 7000000360
50 × $1.75 -
×
ACS CX1250 Diamond Belt, 1/2" X 24" 9u
12 × $7.60 -
×
3M 22395, Roloc Disc 361F, 60 YF-weight, TR, 3 in, Die R300V, 7000045098
400 × $1.33 -
×
3M 84182, Microfinishing PSA Film Disc Roll 366L, 100 Mic 3MIL, Type D, 5 in x NH, Die 500X, 7010307771, 125 discs per roll
4 × $112.92 -
×
3M 33349, 641WY 1/4" X 24", 220 Mesh Diamond Cloth Belt, 7010534919
15 × $9.52 -
×
3M 33780, 641WY 1/4" X 24", 400 Mesh Diamond Cloth Belt, 7010534915
15 × $9.52 -
×
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
1 × $33.40 -
×
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
500 × $0.60 -
×
3M 71346, 675L, 1" X 120", 125u, Diamond Microfinishing Film Belts, 7010534823
1 × $97.89 -
×
ACS Diamond Cloth Belt, CX1250 1" X 49" 125U
6 × $29.95 -
×
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
200 × $1.50 -
×
3M 28120, Hookit Clean Sanding Disc 900DZ, 5 in 60 J-weight, Die 500LG, 7010326613
250 × $1.51
3M 02116, Paper Sheet 346U, 60 D-weight, 9 in x 11 in, 7000120221
$1.11
Factory Stock, 7-10 Day Leadtime
3M Paper Sheet 346U is constructed of aluminum oxide and comes in a range of grades and sizes to accommodate many different projects. The paper backing is durable for coarse sanding, yet flexible enough to be used on curved surfaces. Its cut-rate and durability make this an excellent choice for blending the joints of connecting pieces in wood- and metal-working.
Aluminum oxide is a very hard mineral that maintains sharp points on the grains much longer than natural abrasives such as emery or garnet. The abrasive grains are adhered to the sandpaper with some space between them, known as open-coat construction, to minimize the buildup of dust on the surface of the paper, which would otherwise load the abrasive points. Loading often results from sanding soft materials and can clog the abrasive, shortening the usable life of the sandpaper sheet.
