-
×
NORTON 66623313925 - 2" Dia. Blaze Rapid Blend Quick-Change TS (TYPE II) Non-Woven Disc, 25 Each
25 × $5.29 -
×
Dynabrade 51750 .1 hp Straight-Line Extension Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet
1 × $603.00 -
×
Dynabrade 51629 .1 hp Straight-Line Pencil Grinder, Central Vacuum, 1/8" Collet
1 × $603.00 -
×
3M 15060, Roloc + Button 7, 3/8 in Red, 7000045945
1 × $5.62 -
×
3M 62604, Scotch-Weld Threadlocker TL42, Blue, 1 mL Pipette, 7100064043, 100/case
100 × $2.15 -
×
3M 76750, Roloc Disc 777F, 60 YF-weight, TS, 2 in, Die RS200P, 7010299188
200 × $1.12 -
×
3M 01032, Scotch-Brite Clean and Strip Unitized Wheel, CS-UW, 7S Extra Coarse, 6 in x 1 in x 5/8 in, 7000120867
2 × $111.05 -
×
3M 20910, PSA Cloth Disc 348D, 60 X-weight, 2 in x NH, Die 200P, 7000118872
200 × $0.80 -
×
3M™ 53797, Flexible Diamond Belt 6451J, 1/2" Dia x 18" L, M125 Micron, Type G, Pattern B2, 7010509272
6 × $43.00 -
×
3M 88905, PSA Cloth Disc 348D, 40 X-weight, 12 in x NH, Die 1200B, 7010294665
10 × $8.41 -
×
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
500 × $0.67 -
×
Dynabrade 51624 .1 hp Straight-Line Pencil Grinder, Central Vacuum, 35,000 RPM, 3mm Collet
1 × $603.00 -
×
Standard Abrasives 840037, Quick Change Surface Conditioning GP Disc, A/O Coarse, TSM, Brown, 3/4 in, QS75KM, 7000121646, 50/case
50 × $0.84 -
×
Standard Abrasives 541152, Quick Change TS P.A.R.T. #30 Disc Mandrel, 5/8 in TA4 (PILOT), 7000121724
5 × $25.05 -
×
3M 11412, Roloc Disc 361F, 36 YF-weight, TR, 1 in, Die R100N, 7000045092
500 × $0.60 -
×
3M™ 72787, Calibration Kit 529-04-48, Large, 7000052154, 1 EA/Case
1 × $2,225.47 -
×
Dynabrade 51708 .1 hp Straight-Line Pencil Grinder, 35,000 RPM, 3/32" Collet
1 × $558.00 -
×
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
1 × $33.40 -
×
Dynabrade 51622 .1 hp Straight-Line Pencil Grinder, Central Vacuum, 35,000 RPM, 3mm Collet
1 × $603.00 -
×
Dynabrade 95848 Dynabrade Gear Oil
1 × $12.98
Dynabrade 78851 Controlled Flare End Brush 1″ Dia. x .020 x 1-1/8″ Steel
$24.60
1″ Dia. x .020 x 1-1/8″ Steel, 22,000 Max RPM
Wire Wheel Specifications
Mfr. Part # 78851
| Abrasive Category | Wire Brush Abrasives |
|---|---|
| Abrasive Diameter [inches] | 1″ |
| Abrasive Shape | End Brush |
| Diameter [inches] | 1″ |
| Abrasive Length [inches] | 1-1/8″ |
| Abrasive Sub Shape | Controlled Flare |
| CE Certified | No |
| EAC Certified | No |
| Height [inches] | 0.0 |
| Length [inches] | 0.0 |
| Weight [pounds] | 0.0 |
| Width [inches] | 0.0 |
| Abrasive Sub Shape 2 | Steel |
| Abrasive Tier | Good |
| EAN (UPC) Code | 0616026788510 |
| GL_Minimum Order Quantity | 1.0 |
| Quantity Each Pack | 1 |
| Type | Steel |
Related products
Dust Collection Systems
$28,988.00
