-
×
Dynabrade 61204 RaptorVac Pneumatic DrumVac Kit, Single Operator, General Purpose
1 × $2,026.11 -
×
Dynabrade 61203 RaptorVac Pneumatic DrumVac Kit, Single Operator, For Use With Tools
1 × $2,389.00 -
×
Dynabrade 80540 Mini-Raptor 2 Vac HEPA Filter
1 × $90.00 -
×
Dynabrade 62346 Interface Ring
1 × $413.75 -
×
Dynabrade 61200 RaptorVac Electric DrumVac Kit, Single Operator, General Purpose
1 × $2,268.04 -
×
Dynabrade 62347 Interface Ring
2 × $386.32 -
×
Dynabrade 32012 Single Inlet
1 × $144.50 -
×
Dynabrade 61202 RaptorVac Pneumatic DrumVac Kit, Single Operator, General Purpose
1 × $2,268.04 -
×
Dynabrade 63603 RaptorVac PowerHead Replacement for 61203
1 × $1,391.25 -
×
Dynabrade 63602 RaptorVac Vacuum Head Replacement for 61202
1 × $1,207.50 -
×
Dynabrade 96746 General Purpose Cleaning Kit
1 × $536.43 -
×
Dynabrade 14000 Dynafile Abrasive Belt Tool
1 × $734.00 -
×
Dynabrade 96101 Dynabrade Air Lube 10W/NR 24 Per Box
1 × $385.42 -
×
Dynabrade 11477 Dynabelter Abrasive Belt Tool, Heavy-Duty
1 × $2,712.00 -
×
Dynabrade 95394 1/2" NPT Female 3/8" NPT Male, 1-3/4" Length
1 × $51.49 -
×
3M 28761, Cubitron II Cut and Grind Wheel, T27, 9 in x 1/8 in x 7/8 in, 7100019075, 20 per case
20 × $21.64 -
×
3M™ 07012, Supplied Air Hose W-9435-100/07012(AAD), 100 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005375, 1 EA/Case
1 × $435.37 -
×
3M™ 72787, Calibration Kit 529-04-48, Large, 7000052154, 1 EA/Case
1 × $2,225.47 -
×
3M 94312, SecureFit Safety Helmet, X5007V-ANSI, Orange, vented, 10 EA/Case, 7100175583
1 × $859.09 -
×
3M™ 72122, Portable Compressed Air Filter and Regulator Panel 256-02-01, 100 cfm, 8 outlets, with Carbon Monoxide Monitor, 7000052147, 1 EA/Case
1 × $6,424.71 -
×
Norton 66623325035 - 2" 120 Grit Fine Grade Aluminum Oxide Vortex Rapid Prep Green TR Non-Woven Surface Preparation Disc, 50 Each
50 × $1.70 -
×
Dynabrade 50149 3/8"-24 Female M14 x 2 Male, 1" Length
1 × $34.27
Standard Abrasives 700143, Mandrel, 3 in x1/4 in x 8-32 TM-3, 7000121747
$5.80
Factory Stock, 7-10 Day Leadtime
Our Standard Abrasives Mandrel enables users to access tight diameters and hard-to-reach surface areas by adding length to the abrasive and helping with a wide range of industrial applications.
Get Inside Hard-To-Reach Areas
Standard Abrasives™ Mandrel is a tool attachment designed to hold a Standard Abrasives™ Unitized Wheel. The 6mm shank diameter fits a 6mm power tool collet or drill chuck. An integral part of the overall application, the mandrel acts as a conduit, connecting the abrasive wheel with the rotary tool.
Easy Attachment
Some Standard Abrasives™ Unitized Wheels come with Quick Change Attachment Styles: TS, TR and TP. This mandrel was especially designed for center hole (CH) unitized wheels without Quick Change attachments. The mandrel facilitates easy fastening of the abrasive wheel to the tool. It drives 1″ diameter x 1″ wide x 3/16″ CH unitized wheels. Made with steel, it is exceptionally durable and long-lasting, so it can stand up to repeated wear and be used during heavy-duty applications.
Our Standard Abrasives™ Mandrel is a helpful accessory for tackling hard-to-reach areas and getting inside those tight spots that your projects may require.
Related products
