-
×
Dynabrade 79145 1/4" W x 24" L 60 Grit DynaCut Premium Ceramic Belt, 50/pack
50 × $3.19 -
×
Dynabrade 01011 Vane Set (4pk)
1 × $27.37 -
×
Dynabrade 97327 Screw
1 × $2.07 -
×
Dynabrade 13411 Dynisher Finishing Tool Versatility Kit
1 × $1,748.00 -
×
Dynabrade 94897 Re-usable Compression Fitting Ass'y (for 8mm Hose)
1 × $9.62 -
×
Dynabrade 57120 5" Self-Generated Vacuum Conversion Kit
1 × $132.65 -
×
Dynabrade 57442 Housing for Model 57400; 2,400 Strokes/Min
1 × $107.62
-
×
Dynabrade 78196 3" Dia. x 50 Grit A/O DynaCut Locking-Type Disc, 2 Ply Cloth, 25/pack
25 × $26.00 -
×
Dynabrade 52861 .4 hp Straight-Line Pencil Grinder, Rear Exhaust, 25,000 RPM, 1/8" Collet
1 × $582.00 -
×
Dynabrade 65752 2" x 48" (51 mm x 122 cm) Electric Variable Speed Tool Post Grinder, 3 hp, Wet, 220 V (AC), 3 Phase, 50/60 Hz
1 × $9,622.00 -
×
Dynabrade 90410 1/8" W x 24" L 180 Grit A/O DynaCut Belt, 50/pack
50 × $0.85 -
×
Dynabrade 53406 Drop-In Motor
1 × $448.88 -
×
Dynabrade 95216 Pin
2 × $2.07 -
×
Dynabrade 96425 Screws For Vacuum Shroud (57737)
1 × $2.07 -
×
Dynabrade 90040 5" Dia. Foam, Flat Face Polishing Pad
1 × $17.33 -
×
Dynabrade 64000 SuperFinisher, 115 Volts (AC), 1 Phase, 60 Hz
1 × $19,371.00 -
×
Dynabrade 48371 .4 hp Straight-Line Die Grinder, Rear Exhaust, 25,000 RPM, 1/4" Collet
1 × $437.00 -
×
Dynabrade 95541 Grease Gun
1 × $33.57 -
×
Dynabrade 92102 3" W x 10-11/16" L 80 Grit A/Z DynaCut Belt, 10/pack
10 × $4.16 -
×
Dynabrade 58033 - 3" (76 mm) Dia. Non-Vacuum Wet Dynafine Round Disc Pad, Hook-Face, Short Nap
1 × $33.35
-
×
Dynabrade 50060 Flange
1 × $52.99
-
×
Dynabrade 93534 3" Mandrel for Sanding Stars, 3-48 Male Thread
1 × $9.90 -
×
Dynabrade 52818 Rotor
1 × $181.97
-
×
Dynabrade 92118 1/4" W x 12" L 180 Grit A/O DynaCut Belt, 50/pack
50 × $1.15 -
×
Dynabrade 45234 Sleeve, for 48541, 15K RPM
1 × $43.44
-
×
Dynabrade 97316 Washer
1 × $4.91
-
×
Dynabrade 50010 Collet, 3/8"-24 Female Thread, 1/4" Capacity, 3-Piece Collet
1 × $83.35 -
×
Dynabrade 79356 3" Dia. x .035 W x 3/8" Center Hole, Z/A Reinforced Cut-Off Wheel, 10/box
10 × $5.76 -
×
Dynabrade 52256 .7 hp Straight-Line Die Grinder, Front Exhaust, 15,000 RPM, 1/4" Collet
1 × $536.00 -
×
Dynabrade 39030 - 3 1/4" Roto Peen Hub Assy
1 × $727.89
-
×
Dynabrade 33666 ND6390, Paper Clamp Lever Rivet
1 × $1.50
-
×
Dynabrade 45237 Sleeve, for 48531, 15K RPM
1 × $43.44
-
×
Dynabrade 30451 Housing Assembly for 51816 Air Motor, 20,000 RPM
1 × $140.64
-
×
Dynabrade 56037 Bearing Plate
1 × $30.25
-
×
Dynabrade 13503 Dynastraight Finishing Tool, 1 HP, Rear Exhaust, 3,400 RPM, 5/8" (16 mm) Dia. Arbor
1 × $996.00 -
×
Dynabrade 15101 Tension Arm (for Mini Dynafile II)
1 × $47.74 -
×
Dynabrade 95226 O-Ring
1 × $2.07
-
×
Dynabrade 97060 Lever Pivot Pin, M2.5 x 24
1 × $2.07
-
×
Dynabrade 78709 3/8" x 3/4"-B52 Dynacut A/O Mounted Point, Vitrified, 5/pack
5 × $1.57 -
×
Dynabrade 45202 Sleeve for 48327, 30,000 RPM
1 × $43.44 -
×
Dynabrade 90407 1/8" W x 24" L 80 Grit A/O DynaCut Belt, 50/pack
50 × $0.85
-
×
Dynabrade 79407 4" Dia. x 4" W x 3/4" Arbor Hole, Very Fine, NWN DynaBrite Finishing Flap Roll
1 × $98.55 -
×
Dynabrade 95676 1/4" Female Coupler with 1/4" Male Plug Assembly
1 × $31.48 -
×
Dynabrade 51301 .5 hp Straight-Line Die Grinder
1 × $453.00
Dynabrade 51148 4-1/2″ Dia. Disc Backup Pad, Medium Density, 5/8″-11 Thread
$30.86
Medium Density, 5/8″-11 Thread
- Dynabrade sanding disc backing pad has a diameter of 4 1/2 in. The arbor attachment allows for easy mounting to the tool or pad. All abrasive products that rotate or spin, such as the ones in this category, have a maximum speed at which you can run them. This Dynabrade sanding disc backing pad can be run at a maximum speed of 13000 RPMs.
Pad Specifications
Mfr. Model # 51148
- Brand: Dynabrade
- Attachment Type: Arbor
- Pad Diameter: 4-1/2 in
- Thread Size: 5/8-11
- Thread Type: Female
- Density Grade: Medium
- Maximum RPM: 13,000
Related products
Dynabelter Contact Arms
Dynabrade 11684 Dynabelter Contact Arm Assembly 4″ DIA X 5/8″ W., 40 Duro Serrated
$438.51
