-
×
3M 20160, Scotch-Weld Epoxy Adhesive 1838, Green, Part A, 5 Gallon Drum (Pail), 7010309728
5 × $422.42 -
×
ACS CX1250 Diamond Belt, 1/2" X 24" 74u
12 × $7.60 -
×
3M 16325, PPS Lid & Liner Kit, Large (28 fl oz), 125 Micron Full
Diameter Filter, 25 Lids & Liners per kit, 7100003284
1 × $70.50 -
×
3M 45714, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 3 in x NH, D/F 3HL, Die 300BE, 7100113113
1 × $0.86 -
×
3M 10120, Synthetic Steel Wool Pads, 10120NA, #000 Extra Fine, 7000126149
18 × $2.69 -
×
Norton 66261014897 2" x 1/4" Bear-Tex NEX Rapid Blend AO Medium Grit TR (Type III) Non-Woven Wheel, 60 Each
60 × $4.62 -
×
3M 16612, Accuspray Atomizing Head, Orange, 1.4 mm, 7100017731 (4 Nozzles/Kit)
6 × $30.70 -
×
3M 45704, Cubitron II Hookit Cloth Disc 947A, 60+ X-weight, 5 in x NH, Die 500X, 7100113137
200 × $2.34 -
×
3M 66626, Cloth Belt 341D, 50 X-weight, 4 in x 36 in, Fabri-lok, Single-flex, 7010308385, 25 per case
25 × $6.86 -
×
3M 28214, Cubitron II Roloc Disc 984F, 60+ YF-weight, TR, 2 in, Die R200P, 7010361116
200 × $1.40 -
×
Dynabrade 59339 Vacuum Cuff, 1", w/Groove
1 × $12.63 -
×
3M 77197, Scotch-Brite™ Roloc™ Deburr and Finish PRO Unitized Wheel,TR, 3 in x 1/8 in x NH, 8C CRS+, 7100109130, 40/box
40 × $11.06 -
×
3M 35790, 675L, 1" X 120", 74u, Diamond Microfinishing Film Belts, 7010509196
2 × $97.15 -
×
3M 01326, PSA Cloth Disc 348D, P240 X-weight, 3 in x NH, Die 300V, 7000045069
200 × $0.95 -
×
3M 72600, 663FC 1/2" X 30", 70u Diamond Trizact Belt, 7100206529
1 × $0.00 -
×
Dynabrade 79109 1/2" W x 12" L 80 Grit DynaCut Premium Ceramic Belts, 50/pack
50 × $2.89 -
×
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
1 × $33.40 -
×
3M™ 07010, Supplied Air Respirator Hose W-9435-25/07010(AAD), 25 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005374, 1 EA/Case
1 × $175.93 -
×
3M 20907, PSA Cloth Disc 348D, P120 X-weight, 2 in x NH, Die 200P, 7000118875
200 × $0.71 -
×
ACS Flap Disc, Type 29 (Curved) Full Diamond 4-1/2 X 5/8-11 60M, 333.FD4.5-60/T29
1 × $52.00 -
×
3M™ 72787, Calibration Kit 529-04-48, Large, 7000052154, 1 EA/Case
1 × $2,225.47 -
×
3M 29611, 641WY 1/4" X 24", 100 Mesh Diamond Cloth Belt, 7010534832
15 × $7.30 -
×
Standard Abrasives 701616, PSA A/O Disc, 12 in x NH, 50, 7010369977
10 × $6.01 -
×
Insize 6301, MICROMETER STAND, 6928640307300
1 × $38.90 -
×
3M 33349, 641WY 1/4" X 24", 220 Mesh Diamond Cloth Belt, 7010534919
15 × $9.52 -
×
Dynabrade 53270 7" (180 mm) Dia. Right-Angle Disc Sander
1 × $1,509.65 -
×
3M™ 07012, Supplied Air Hose W-9435-100/07012(AAD), 100 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005375, 1 EA/Case
2 × $435.37
-
×
3M 20967, Portable Utility Cloth Roll 314D, P240 J-weight, 1 in x 20 yd, 7010290604
5 × $16.22 -
×
3M 45717, Cubitron II Hookit Cloth Disc 947A, 80+ X-weight, 5 in x NH, D/F 5HL, Die 500FH, 7100113111
200 × $1.95 -
×
3M 01331, Stikit Gold Film Disc Roll, 6 in, P120 grade, 7010292680, 75 discs per roll
6 × $86.31 -
×
3M 62795, Polyurethane Adhesive Sealant 550FC Fast Cure, Black, 310 mL Cartridge, 7100001803, 12/Case
12 × $11.11 -
×
3M 19773, Utility Cloth Sheet 314D, 9 in x 11 in P60 X-weight, 7000000360
50 × $1.75 -
×
3M 20911, PSA Cloth Disc 348D, 50 X-weight, 2 in x NH, Die 200P, 7000118871
200 × $0.82 -
×
Standard Abrasives 711471, A/O Straight Cartridge Roll, 1/2 in x 1 in x 1/8 in 120, 7100085873
198 × $0.41 -
×
Insize 4807, ANGLE GAGE SET, 6928640319341
1 × $64.73
-
×
3M™ 37018, Supplied Air Respirator Vortex Cooling Assembly V-100/37018(AAD), 70070799013, 1 EA/Case
1 × $397.07 -
×
Standard Abrasives 707620, A/O Straight Cartridge Roll, 1/4 in x 1 in x 1/8 in 120, 7100080011
100 × $0.35 -
×
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
500 × $0.60
Standard Abrasives 541034, Track Mandrel, 3/4 in x 1/4 in Shank, 7000121718
$14.80
Factory Stock, 7-10 Day Leadtime
Our Standard Abrasives Mandrel enables users to access tight diameters and hard-to-reach surface areas by adding length to the abrasive and helping with a wide range of industrial applications.
Get Inside Hard-To-Reach Areas
Standard Abrasives™ Mandrel is a tool attachment designed to hold a Standard Abrasives™ Unitized Wheel. The 6mm shank diameter fits a 6mm power tool collet or drill chuck. An integral part of the overall application, the mandrel acts as a conduit, connecting the abrasive wheel with the rotary tool.
Easy Attachment
Some Standard Abrasives™ Unitized Wheels come with Quick Change Attachment Styles: TS, TR and TP. This mandrel was especially designed for center hole (CH) unitized wheels without Quick Change attachments. The mandrel facilitates easy fastening of the abrasive wheel to the tool. It drives 1″ diameter x 1″ wide x 3/16″ CH unitized wheels. Made with steel, it is exceptionally durable and long-lasting, so it can stand up to repeated wear and be used during heavy-duty applications.
Our Standard Abrasives™ Mandrel is a helpful accessory for tackling hard-to-reach areas and getting inside those tight spots that your projects may require.
