-
×
Standard Abrasives 705998, Spiral Band, 3/4 in x 1 in 80, 7010331382
100 × $0.80 -
×
3M 53034, 663FC, 3/4" X 90", 20u, Diamond Trizact Belt 7100205969
1 × $381.01 -
×
Dynabrade 92754 3" W x 150' L 15 Micron A/O Microfinishing Film DynaCut Roll
1 × $204.78 -
×
Dynabrade 53332 Carrier, 4.038:1, 4.038:1 Output
1 × $320.66 -
×
3M 87253, Cubitron II Fibre Disc 987C, 80+, 4-1/2 in x 7/8 in, Die 450E, 7100109862
50 × $4.81 -
×
Dynabrade 92721 1" W x 150' L 30 Micron A/O Microfinishing Film DynaCut Roll
1 × $55.50
-
×
Standard Abrasives 877036, Unitized Mounted Point, 631 B52 x 1/8 in, 3M 7010368365
5 × $6.57 -
×
Dynabrade 15101 Tension Arm (for Mini Dynafile II)
1 × $47.74 -
×
Standard Abrasives 700717, Cartridge Roll Mandrel, 1/8 in x 3/4 in x 1/4 in x 1-1/4 in x 2-1/2 in CM-8, 7000121752
5 × $5.36 -
×
Dynabrade 90544 1/2" W x 44" L 60 Grit Z/A DynaCut Belt, 50/pack
50 × $3.43 -
×
Dynabrade 57127 3" (76 mm) Dia. Right Angle Depressed Center Wheel Grinder, Steel Housing, .55 HP, 15,000 RPM, 3/8"-24 Spindle
1 × $562.00
3M 35790, 675L, 1″ X 120″, 74u, Diamond Microfinishing Film Belts, 7010509196
$97.15
- Micron-graded diamond mineral delivers close tolerance precision finishes
- Great for medium stock removal
- Polyester film backing allows belt to be used dry or wet with water or oil-based lubricants
- An exceptional film for thermal spray finishing of contour / complex shapes
- Color coded to reduce the risk of error and mixing up abrasive grades
Designed with a strong polyester film backing and sharp diamond mineral, the 3M™ Diamond Microfinishing Film Belt 675L delivers fine finishes on hard metals like thermal spray coating, ceramics, carbides, chilled iron and granite.
High-quality Materials for Micro-finishing
3M™ Diamond Microfinishing Film Belt 675L securely anchors micron-graded diamonds to a polyester film backing. Polyester film backings are water resistant, so the abrasive may be run with a water or oil-based lubricant, which helps wash away unwanted swarf and debris and keeps the abrasive running cool. The belts are also color coded by grade to help you reduce the risk of selecting the wrong grade.
Tips for Achieving Desired Roughness Average
Many Micro-finished products require a specific Ra, or roughness average, when applying to thermal spray coatings, carbides, ceramics, exotic alloys, or other composites. It is important for operators to consider these factors – Ra and substrate – when selecting the grade of film for this belt.
Related products
