-
×
Insize 1121-1501, DIGITAL INSIDE POINT C, 35-150mm/1.38-6", 6928640385056
1 × $316.26 -
×
Dynabrade 51753 .1 hp Straight-Line Extension Pencil Grinder, Rear Exhaust, 50,000 RPM, 1/8" Collet
1 × $573.77 -
×
Insize 1120-150AWL, DIGITAL INSIDE GROOVE CALIPER, 1-6"/25.4-150mm, built-in wireless, 6928640384769
1 × $241.75
-
×
Insize 2197, LARGE RANGE DIGITAL RADIUS GAGE, R1(4-590"/100-1500mm), R2(4-590"/100-1500mm), 697409778087
1 × $4,148.69
-
×
3M 36849, Dirt Trap Protection Material, White, 4 in x 300 ft, 7100133779
6 × $84.70 -
×
Insize 1501-10, DIGITAL RADIUS CALIPER, .079-0.394"/2-10mm, 0.0005"/0.01mm, 6940561975086
1 × $257.34
-
×
Insize 6300, MICROMETER STAND, 6928640307294
1 × $51.04
-
×
Insize 1121-200B, DIGITAL INSIDE POINT CALIPER, 60-200mm/2.36-8", type B, 6928640375668
1 × $508.62
-
×
Dynabrade 40610 Electric Dynafile II Abrasive Belt Tool
1 × $400.59 -
×
3M 03140, General Purpose Sanding Sponge CP041-6P, Single Angle, 2-7/8 in x 4-7/8 in x 1 in, Medium, 7100101537, 6/pack
4 × $16.74 -
×
3M 71358, 641WY 1/4" X 24", 600 Mesh Diamond Cloth Belt, 7010534894
1 × $9.18 -
×
3M 01875, Charge-Collection Solar Tape 3011, 2 mm x 1200 m, 7010312686
9 × $602.05 -
×
Insize 0213-A500, INFRARED THERMOMETER, -58?F~716?F/-50?C~380?C, 6940561934700
1 × $79.29
-
×
Insize 4102-136, STEEL GAGE BLOCK SET, 36pcs, grade AS-1, 6928640329876
1 × $416.78
-
×
Standard Abrasives 713297, Aluminum Oxide Handy Roll, P120 J-weight, 2 in x 50 yd, 7100031623
1 × $47.66 -
×
Insize 1120-500, DIGITAL INSIDE GROOVE CALIPER, 1.57-20"/40-500mm, 6940561961034
1 × $871.68
-
×
3M 82511, Steel Mesh Faceshield Screen W96MW 82511-00000, with Clear Eyeshield, Headgear Not Included 10 EA/Case, 7000127231
1 × $701.18
-
×
3M 82454, Hot Melt Adhesive 3792 LM Q, Clear, 5/8 in x 8 in, 7000000880, 11 LBS/Case
11 × $26.07
Standard Abrasives 269201, Cross Buff Mandrel, 4 in x 1/4 in Shank x 1/4″-20F, 7010368742
$10.23
Factory Stock, 7-10 Day Leadtime
Standard Abrasives Cross Buff Mandrel secures a cross buff to a rotary tool with a _-inch collet assembly. The cross buff is then used to polish and clean inside diameters and hard-to-reach areas on a variety of metal substrates.
About Cross Buffs
Our Standard Abrasives Cross Buff Mandrel is designed to work with a variety of cross buffs to polish, clean, satin finish, denib and defuzz interior diameters of metal components.
Maximize the Value of Your 3M Power Tools
Engineered to work effectively with your 3M rotary tools, we design our accessories to perform to the highest standards, to allow you to do more, more cost-efficiently.
Quality Standard Abrasives Solutions for Industrial Applications
The Standard Abrasives brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high-performance products including coated, bonded, and non-woven abrasive lines.
