-
×
Dynabrade 80085 Vacuum Inlet Ass'y
1 × $50.00 -
×
Dynabrade 53565 3/8"-24 Spindle- Rt. Angle Ext.
1 × $128.46
-
×
Dynabrade 97551 Bushing
1 × $44.45
-
×
Dynabrade 53477 Direct Drive Reversible Screwdriver, .5 HP, 3,700 RPM, 1/4" Hex Drive
1 × $818.00 -
×
Dynabrade 82481 6" Dia. x 180 Grit A/O Non-Vacuum PSA Filmbac DynaCut Disc, 100/Pack
100 × $110.00 -
×
Dynabrade 52705 3" (76 mm) Dia. Right Angle Depressed Center Wheel Grinder, .4 HP, 15,000 RPM, 3/8"-24 Spindle
1 × $847.00 -
×
Dynabrade 97103 3/8"-24 Female, 1/2"-20 Male, 2" Length
1 × $151.00 -
×
Dynabrade 57513 - 2-3/4" (70 mm) W x 11" (279 mm) L Non-Vacuum File Board Disc Pad, Hook-Face, Short Nap
1 × $37.50
-
×
Dynabrade 78327 2" x 1" x 1/4 Shank, 180 Grit, Dynabrite Interleaf Wheel, 10/pack
10 × $16.16 -
×
Dynabrade 53242 7" Dia. Type 27 Vertical Depressed Center Wheel Grinder, 3 HP, 6,000 RPM, 5/8"-11 Spindle
1 × $1,591.00 -
×
Dynabrade 53878 Housing for Model 52315
1 × $109.36
-
×
Dynabrade 43510 .4 hp 6" (152 mm) Extension Die Grinder, Front Exhaust, 25,000 RPM, 1/4" Collet
1 × $766.00 -
×
Dynabrade 90338 3-1/2" W x 15-1/2" L 220 Grit A/O DynaCut Belt, 10/pack
10 × $4.66 -
×
Dynabrade 52206 .4 hp 7 Degree Offset Die Grinder, Front Exhaust, 30,000 RPM, 1/4" Collet
1 × $459.00 -
×
Dynabrade 64061 - 3/4" Tool Post Mount
1 × $192.64
-
×
Dynabrade 52576 3" (76 mm) Dia. Straight-Line 6" (152 mm) Extension Cut-Off Wheel Tool, Rear Exhaust, 1 HP, 15,000 RPM, 3/8"-24 Spindle
1 × $818.00 -
×
Dynabrade 02520 Slider
1 × $85.98 -
×
Dynabrade 52294 .7 hp 7 Degree Offset Die Grinder, Rear Exhaust, Short Shank, 20,000 RPM, 1/4" Collet
1 × $633.00 -
×
Dynabrade 55152 Front Bearing Plate
1 × $48.62 -
×
Dynabrade 33641 ND6420, End Cap Side Screw
1 × $1.50
-
×
Dynabrade 54736 4" (102 mm) Dia. Extended Right Angle Type 1 Cut-Off Tool, .7 HP, 13,500 RPM, 3/8"-24 Spindle
1 × $1,077.00 -
×
Dynabrade 92061 2" Dia. x 2" W, 60 Grit, Z/A DynaCut Band, 10/pack
10 × $3.53 -
×
Dynabrade 11462 Dynabelter Finisher
1 × $2,196.00 -
×
Dynabrade 94857 12' Max Flow 10mm I.D. Air Hose Assembly, Male (1/4") / Male (1/4") Fitting Ends Included
1 × $103.17 -
×
Dynabrade 49420 .4 hp Angle-Head Die Grinder, Rear Exhaust, 3,200 RPM, 1/4" Collet
1 × $1,214.00 -
×
Dynabrade 90045 5" Dia. Polishing Pad, Foam, Flat Face
1 × $17.33 -
×
Dynabrade 53472 Direct Drive Reversible Screwdriver, .5 HP, 450 RPM, 1/4" Hex Drive
1 × $898.71 -
×
Dynabrade 96464 - 100K PG Inlet Seal Burn-In Manifold
1 × $86.71 -
×
Dynabrade 78663 1/2" Dia. x 1-1/2" W x 1/8" Center Hole, Tapered Cartridge Rolls, A/O, 60 Grit, 100/pack
100 × $1.29 -
×
Dynabrade 40326 Dynafile II Abrasive Belt Tool for 20-1/2" Belts
1 × $749.00 -
×
Dynabrade 69360 Composite Throttle Lever, For 3/16" (5 mm) Dia. Orbit Models
1 × $16.16 -
×
Dynabrade 52451 7" Dia. Vertical Disc Sander, Side Exhaust, 2 HP, 7,200 RPM, 5/8"-11 Thread
1 × $1,507.00 -
×
Dynabrade 31642 Spring
1 × $40.81
Standard Abrasives 269201, Cross Buff Mandrel, 4 in x 1/4 in Shank x 1/4″-20F, 7010368742
$10.23
Factory Stock, 7-10 Day Leadtime
Standard Abrasives Cross Buff Mandrel secures a cross buff to a rotary tool with a _-inch collet assembly. The cross buff is then used to polish and clean inside diameters and hard-to-reach areas on a variety of metal substrates.
About Cross Buffs
Our Standard Abrasives Cross Buff Mandrel is designed to work with a variety of cross buffs to polish, clean, satin finish, denib and defuzz interior diameters of metal components.
Maximize the Value of Your 3M Power Tools
Engineered to work effectively with your 3M rotary tools, we design our accessories to perform to the highest standards, to allow you to do more, more cost-efficiently.
Quality Standard Abrasives Solutions for Industrial Applications
The Standard Abrasives brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high-performance products including coated, bonded, and non-woven abrasive lines.
