-
×
3M 06536, Scotch Steel Gray Masking Paper, 06536, 36 in x 1000 ft, 1 per case, 7000045443
1 × $264.36 -
×
3M 45715, Cubitron II Hookit Cloth Disc 947A, 40+ X-weight, 5 in x NH, D/F 5HL, Die 500FH, 7100113110
200 × $3.07 -
×
ACS Diamond Grinding Disc, 4-1/2" Dia. X 5/8"-11 Center Hub Thread, Type 29, 36 Grit
2 × $40.00 -
×
3M 06518, Scotch Steel Gray Masking Paper, 06518, 18 in x 1000 ft, 2 per case, 7000045441
2 × $134.17 -
×
3M 00705, Interam Stainless Steel Foil Tape T-65, 4 in x 100 ft, 7100024280
72 × $192.19 -
×
Dynabrade 62346 Interface Ring
1 × $386.32 -
×
Dynabrade 78424 4-1/2" Dia. x 3/8" Medium DynaBrite Surface Conditioning Disc, 25/pack
25 × $4.86 -
×
3M 94442, Speedglas G5-02 Outside Protection Plate 08-0200-52, Scratch Resistant, 5 ea/Case, 7100241529
1 × $32.00
-
×
3M 80759, Flap Wheel 747D, T83, 2 in x 1 in x 1/4 in, 80 X-weight, 7000000444, 10 per case
10 × $12.86 -
×
Dynabrade 02084 Angle Housing Assembly,Steel, Rear Exhaust
1 × $220.09 -
×
3M 11419, Roloc Disc 361F, P240 XF-weight, TR, 2 in, Die R200P, 7000045105
200 × $0.97 -
×
3M 45720, Cubitron II Hookit Cloth Disc 947A, 60+ X-weight, 6 in x NH, D/F 6HL, Die 600HZ, 7100113076
200 × $3.13 -
×
3M 26130, PPS Series 2.0 Adapter, Type S35, 16 mm Female, 1.5 mm
Thread Stretched, 7100135926
1 × $25.96 -
×
3M 93623, Steel Mesh Viso V4G-10P 10 ea/Case, 7000103815
1 × $159.55
-
×
Standard Abrasives 709187, A/O Straight Cartridge Roll, 1/2 in x 1-1/2 in x 1/8 in 60, 7100085869
100 × $0.55 -
×
Norton 66261096557 - 3" X 1/2" Blaze Rapid Strip Ceramic Alumina Extra Coarse Grade Non- Woven Abrasive Disc With Quick Change TR III Attachment, 25 Each
25 × $9.44 -
×
3M 45699, Cubitron II Hookit Cloth Disc 947A, 40+ X-weight, 3 in x NH, Die 300V, 7100113114
200 × $1.38 -
×
3M 82511, Steel Mesh Faceshield Screen W96MW 82511-00000, with Clear Eyeshield, Headgear Not Included 10 EA/Case, 7000127231
1 × $701.18
-
×
3M 35083, EMI Copper Foil Shielding Tape 1181, 1/4 in x 18 yd (6,35 mm x 16,5 m), 7000132168
36 × $18.24 -
×
3M 26583, Accuspray Refill Pack for PPS Series 2.0, Green, 1.3 mm, 7100152953
5 × $10.20 -
×
Dynabrade 78423 4-1/2" Dia. x 3/8" Very Fine DynaBrite Surface Conditioning Disc, 25/pack
25 × $4.86 -
×
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
400 × $1.74 -
×
3M 12952, Scotch-Brite Roloc Surface Conditioning Disc, SC-DR, A/O Very Fine, TR, 4 in, 7100007032, 100 per case
100 × $3.74
Standard Abrasives 269201, Cross Buff Mandrel, 4 in x 1/4 in Shank x 1/4″-20F, 7010368742
$10.23
Factory Stock, 7-10 Day Leadtime
Standard Abrasives Cross Buff Mandrel secures a cross buff to a rotary tool with a _-inch collet assembly. The cross buff is then used to polish and clean inside diameters and hard-to-reach areas on a variety of metal substrates.
About Cross Buffs
Our Standard Abrasives Cross Buff Mandrel is designed to work with a variety of cross buffs to polish, clean, satin finish, denib and defuzz interior diameters of metal components.
Maximize the Value of Your 3M Power Tools
Engineered to work effectively with your 3M rotary tools, we design our accessories to perform to the highest standards, to allow you to do more, more cost-efficiently.
Quality Standard Abrasives Solutions for Industrial Applications
The Standard Abrasives brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high-performance products including coated, bonded, and non-woven abrasive lines.
