-
×
ACS Diamond Cloth Belt, CX1250 1/2" X 72" 125U
12 × $23.20 -
×
3M 50258, Roloc Disc 777F, 60 YF-weight, TSM, 3 in, Die RS300VM, 7010325551
200 × $1.43 -
×
3M 21543, Scotch-Brite Roloc Clean and Strip XT Pro Extra Cut Disc, TR, 2 in x NH, A XCS, 7100179815, 60/box
1 × $4.57 -
×
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
250 × $4.14 -
×
3M 87449 Silver Depressed Center Grinding Wheel, T27 Quick Change, 9 in x 1/4 in x 5/8-11 Center Hub Thread, 7010409732, 20 per case
40 × $12.65 -
×
3M 94734, Cubitron ll Cloth Belt 947A, 80+ X-weight, 3-1/2 in x 15-1/2 in, Fabri-lok, Single-flex, 7100093313, 50 per case
50 × $7.20 -
×
Insize 7341-5S, PIN GAGE HANDLE (with 1pc handle and 6 pairs of collecting bushes), .228-281", 6928640370618
1 × $39.77 -
×
3M 33349, 641WY 1/4" X 24", 220 Mesh Diamond Cloth Belt, 7010534919
15 × $9.52 -
×
Norton 66254432925 Wheel, 3" X 1/2" X 1/4" Bear-Tex, Rapid Blend, Non-Woven 5 Density, A/O, M Grit, 20 Each
20 × $17.78 -
×
Dynabrade 11476 Dynabelter Abrasive Belt Tool, Heavy-Duty
1 × $1,721.00 -
×
3M 15913, Scotch-Brite Roloc Disc High Strength, TR, 2 in X NH A Medium, 7000000710
200 × $1.72 -
×
Dynabrade 14010 Dynafile Abrasive Belt Tool Versatility Kit
1 × $915.00 -
×
3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
500 × $0.67 -
×
3M 26597, Cloth Belt 341D, P320 X-weight, 1 in x 42 in, Film-lok, Single-flex, 7010294511, 200 per case
200 × $2.14 -
×
ACS Diamond Cloth Belt, CX1250 3" X 90" 125U
2 × $171.30
-
×
3M 62616, Scotch-Weld Threadlocker TL90, Green, 50 mL Bottle, 7100039236, 10/case
10 × $42.72 -
×
Dynabrade 11475 Dynabelter Abrasive Belt Tool, Standard Duty
2 × $1,520.00 -
×
Insize 4209-6, LONG HANDLE TELESCOPING GAGE, 3-1/2 ~ 6", 6928640311581
1 × $16.55
-
×
3M 21762, Stikit Cloth Disc Roll 341D, 60 X-weight, 6 in x NH, Die 600Z, 7000118780
400 × $169.03 -
×
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
1 × $33.40 -
×
3M 06839, Booth Coating, 1 Galllon, 7000028421
4 × $99.52 -
×
Dynabrade 11477 Dynabelter Abrasive Belt Tool, Heavy-Duty
2 × $2,712.00 -
×
3M 57894, 642WY 1/4" X 24", 50000 Mesh Diamond Cloth Belt, 7100230570
15 × $0.00 -
×
3M 22396, Roloc Disc 361F, 36 YF-weight, TR, 1-1/2 in, Die R150S, 7000045091
500 × $0.75 -
×
3M 22404, Roloc Disc 361F, 80 YF-weight, TR, 3 in, Die R300V, 7000045100
200 × $1.33 -
×
Dynabrade 95684 1/4" Male Coupler
1 × $26.80 -
×
ACS Diamond Cloth Belt, CX1250 5/8" X 120" 125U
9 × $47.60
-
×
Standard Abrasives 42699, A/O Flexible Flap Wheel 621426, 1 in x 1 in x 1/4-20 in 80, 7010369136, 10 per case
10 × $6.83 -
×
Standard Abrasives 863110, A/O Unitized Wheel, 631, 2 in x 1/4 in x 1/4 in, 7000144629
10 × $5.31 -
×
ACS Diamond Cloth Belt, CX1250 1/2" X 18" 250U
12 × $6.15
-
×
Dynabrade 64404 36" W x 60" L (914 mm W x 1,524 mm L) Metal Capture Downdraft Table, 230 V (AC), Side Exhaust
1 × $28,988.00 -
×
3M 22408, Roloc Disc 361F, P100 YF-weight, TR, 1-1/2 in, Die R150S, 7000045101
500 × $0.67 -
×
Dynabrade 11486 Dynabelter Accu-Grinder Abrasive Belt Tool, Heavy-Duty
1 × $2,022.00 -
×
3M 14708, Heavy Duty Spray Adhesive 20, Clear, 16 fl oz Can (Net Wt 13.8 oz), 7100179437, 12/Case
12 × $9.99 -
×
3M 11412, Roloc Disc 361F, 36 YF-weight, TR, 1 in, Die R100N, 7000045092
500 × $0.60
3M 76624, Roloc Disc 777F, 60 YF-weight, TR, 1 in, Die R100N, 7000045620
$0.62
Factory Stock, 7-10 Day Leadtime
3M Roloc Disc 777F features 3M-engineered high-performing ceramic abrasive grain blended with aluminum oxide for a combination of durability and cutting efficiency that increases productivity for both stock removal and finishing. The heavy, water-resistant polyester backing supports medium-pressure applications, a consistent cut-rate, and both wet and dry applications.
Our 3M Roloc Disc 777F is resin-bonded to withstand high heat and pressure. A grinding aid on the 777F disc reduces grinding temperatures to protect heat-sensitive alloys such as stainless steel and nickel alloys.
3M Ceramic Abrasive Grain is a ceramic mineral designed to enhance toughness and hardness of the grain. For increased performance, 3M Roloc Disc 777F products feature aluminum oxide mineral blended with 3M Ceramic Abrasive Grain which is one of the hardest, longest-lasting minerals available. Perfect for moderate to heavy stock removal, ceramic abrasives are engineered to cut fast and handle intense heat and stress applications. Ceramic aluminum oxide blends surpass aluminum oxide abrasives in cut-rate and durability making them an excellent choice for difficult grinding applications.
3M Roloc Disc 777F is available for use with the following Roloc attachment systems: TSM, TR, TP and TS. Please select discs with the attachment design made for your system.
