-
×
Standard Abrasives 725011, Buff and Blend Cross Buff HP, A/O VFN, 3/4 in x 3/8 in x 2 Ply x 8-32, 7000047134
50 × $3.75 -
×
3M 29611, 641WY 1/4" X 24", 100 Mesh Diamond Cloth Belt, 7010534832
15 × $7.30 -
×
3M 45707, Cubitron II Hookit Cloth Disc 947A, 40+ X-weight, 6 in x NH, Die 600Z, 7100113121
200 × $4.29 -
×
Dynabrade 52439 3" (76 mm) Dia. Right Angle Diamond Cut-Off Wheel Tool
1 × $718.09 -
×
3M™ 72122, Portable Compressed Air Filter and Regulator Panel 256-02-01, 100 cfm, 8 outlets, with Carbon Monoxide Monitor, 7000052147, 1 EA/Case
1 × $6,424.71 -
×
3M 09099, Scotch-Brite Paint and Rust Stripper Large Area 9099NA, 7010375230
6 × $7.45 -
×
3M 06520, Marine Adhesive Sealant 5200FC Fast Cure, White, 295 mL Cartridge, 7000000629, 12/Case
12 × $29.20 -
×
3M 95412, Lead Foil Tape 420, Dark Silver, 3/4 in x 36 yd, 6.8 mil, 7000029006
12 × $103.27 -
×
3M 20911, PSA Cloth Disc 348D, 50 X-weight, 2 in x NH, Die 200P, 7000118871
200 × $0.82 -
×
Dynabrade 64404 36" W x 60" L (914 mm W x 1,524 mm L) Metal Capture Downdraft Table, 230 V (AC), Side Exhaust
1 × $27,619.39 -
×
3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
1000 × $0.67 -
×
3M 26109, PPS Series 2.0 Adapter, Type S23, 1/4 Female, 18 Thread NPS, 7100135941
4 × $25.96 -
×
Dynabrade 53245 7" Dia. Type 27 Vertical Depressed Center Wheel Grinder, 3 HP, 8,500 RPM, 5/8"-11 Spindle
1 × $1,515.78 -
×
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
200 × $1.61 -
×
Dynabrade 14360 Pneumatic Pipe Belt Finisher
1 × $1,598.86 -
×
3M 99633, Scotch-Weld Pressure Fit/High Temperature Retaining Compound RT48, Green, 250 mL Bottle, 7100170130, 2/case
2 × $133.06 -
×
3M 22409, Roloc Disc 361F, P120 XF-weight, TR, 1-1/2 in, Die R150S, 7000045103
500 × $0.67
3M 45190, Disc Pad Hub, 4-1/2 in 5/8-11 Internal, 7000045659
$23.65
Factory Stock, 7-10 Day Leadtime
3M Disc Pad Hub has an internal threaded metal insert that threads onto the shaft of a sander and grinder to hold a disc pad face plate and fiber disc in place.
Our 3M Disc Pad Hub holds the face plate firmly in position to support a fiber disc with a 7/8 inch center hole, which is secured to the hub with a compatible retainer nut. The disc pad hub enables operators to select face plates with four different densities?Soft, Medium, Hard and Extra-Hard?offering the convenience of using a single power tool for multiple grinding applications. Face plates are sold separately.
