-
×
3M™ 17379, Versaflo™ Length Adjusting Breathing Tube BT-30, 7100009685, 1 EA/Case
2 × $80.58 -
×
Norton 66261199696 - 3" X 1/4" X 1/4" Vortex Rapid Blend Unified Wheel, 7AM U2305, 40 Each
40 × $13.52 -
×
3M™ 72010, Replacement Filter Kit 523-01-29, 7000056891, 1 EA/Case
1 × $500.06 -
×
3M 92057, Vinyl Duct Tape 3903, Yellow, 3 in x 50 yd, 6.5 mil, 7010378167
720 × $17.55 -
×
3M 95723, Scotch Automotive Cloth Tape 06980, Olive, 50.8 mm x 18.2 m, 7010312582
24 × $45.27 -
×
3M 01326, PSA Cloth Disc 348D, P240 X-weight, 3 in x NH, Die 300V, 7000045069
200 × $0.95 -
×
ACS Diamond Cloth Belt, CX1250 3/8" X 120" 125U
16 × $27.50 -
×
Dynabrade 14360 Pneumatic Pipe Belt Finisher
1 × $1,598.86 -
×
Air Turbine Tools 310RSV - 1/4" Router Hand Tool Series with Brake, 40,000RPM, 33444
1 × $975.00 -
×
3M 06524, Scotch Steel Gray Masking Paper, 06524, 24 in x 1000 ft, 1 per case, 7000045442
1 × $176.19 -
×
ACS Diamond Cloth Belt, CX1250 3" X 30" 20U
2 × $57.10
-
×
3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
500 × $0.67 -
×
3M 45699, Cubitron II Hookit Cloth Disc 947A, 40+ X-weight, 3 in x NH, Die 300V, 7100113114
200 × $1.38 -
×
Dynabrade 51301 .5 hp Straight-Line Die Grinder
1 × $431.21 -
×
3M 19677, Scotch-Seal Industrial Sealant 800, Reddish Brown, 1 Gallon Drum, 7000000793, 4/Case
4 × $251.59 -
×
Standard Abrasives 707620, A/O Straight Cartridge Roll, 1/4 in x 1 in x 1/8 in 120, 7100080011
100 × $0.35 -
×
Dynabrade 51857 .7 hp Trim Router (Complete), 20,000 RPM, 1/4 Collet
1 × $742.58 -
×
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
250 × $4.14
3M 28476, Disc pad Hub, 2-1/2 in 5/8-11 Internal Low Profile, 7000045288
$19.72
Factory Stock, 7-10 Day Leadtime
3M Disc Pad Hub has an internal threaded metal insert that threads onto the shaft of a sander and grinder to hold a disc pad face plate and fiber disc in place.
Our 3M Disc Pad Hub holds the face plate firmly in position to support a fiber disc with a 7/8 inch center hole, which is secured to the hub with a compatible retainer nut. The disc pad hub enables operators to select face plates with four different densities?Soft, Medium, Hard and Extra-Hard?offering the convenience of using a single power tool for multiple grinding applications. Face plates are sold separately.
