-
×
Standard Abrasives 713638, Cartridge RoII Mandrel, 3/32 in x 3/4 in x 1/8 in x 1 in x 2-3/4 in CM-2B, 7010294964
5 × $4.32 -
×
Dynabrade 95544 Gear Grease, 2.5oz. Tube
1 × $10.89 -
×
3M 26136, PPS Series 2.0 Adapter, Type S32, 18 mm Female, 1.5 mm
Thread, 7100135952
1 × $25.96 -
×
3M 45205, Disc Pad Hub, 2-1/2 in 5/8-11 Internal, 7000120398
1 × $19.25 -
×
Insize 4120-14N, METRIC THREAD RING GAGE, NO GO, M14x2, 6928640341793
1 × $52.16 -
×
3M 01328, PSA Cloth Disc 348D, P180 X-weight, 3 in x NH, Die 300V, 7000045068
200 × $0.95 -
×
Insize 0210-G260, INFRARED THERMOMETER (BASIC TYPE), -22 ?F~500?F/-30?C~260?C, 6974029773310
1 × $66.86
-
×
ACS Diamond Cloth Belt, CX1250 3" X 30" 45U
2 × $57.10 -
×
Standard Abrasives 713159, Aluminum Oxide Handy Roll, P120 J-weight, 1-1/2 in x 50 yd, 7010290409
1 × $37.54 -
×
3M 19765, Utility Cloth Sheet 314D, 9 in x 11 in P280 J-weight, 7000000353
250 × $1.37 -
×
3M 76625, Roloc Disc 777F, 80 YF-weight, TR, 1 in, Die R100N, 7000045621
500 × $0.62 -
×
3M 97421, Aluminum Foil Tape 3380, Silver, 72 mm x 45 m, 3.25 mil, 7010375681
16 × $25.36 -
×
3M 33443, Cubitron II File Belt, 36+, 1/2 in x 18 in (12.7 mm x 457.2 mm), 7100033184, 10 belts per carton, 5 cartons per case
50 × $33.94 -
×
Insize 7261-150, INSIDE SPRING CALIPER, 6", 6928640319624
1 × $15.25
-
×
3M 06536, Scotch Steel Gray Masking Paper, 06536, 36 in x 1000 ft, 1 per case, 7000045443
1 × $264.36 -
×
Dynabrade 15006 Mini-Dynafile II Abrasive Belt Tool Versatility Kit
1 × $789.82 -
×
Dynabrade 92209 1/8" W x 12" L 220 Grit A/O DynaCut Belt, 50/pack
50 × $0.95 -
×
Norton 66261126299 - 2" X 50 Yard 80 Grit Metalite™ Aluminum Oxide Cloth Roll, 1 Each
1 × $61.49 -
×
Insize 7309-C01M, CABLE OF DIGITAL INDICATOR, 6940561958218
1 × $111.78
-
×
Standard Abrasives 32953, PSA A/O Disc, 711880, 2 in x NH, 60, 7010310798
100 × $0.00 -
×
Insize 0130-L110, LIGHT METER (BASIC TYPE), 6974029776564
1 × $65.70
-
×
3M 20909, PSA Cloth Disc 348D, 80 X-weight, 2 in x NH, Die 200P, 7000118873
200 × $0.78 -
×
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
500 × $0.60
3M 28416, Disc Pad Hub And Retainer Nut, 2-1/2 in x M14-2 Internal, 7000119302
$21.41
Factory Stock, 7-10 Day Leadtime
3M Disc Pad Hub and Retainer Nut attach fiber discs to tools with M14-2 threaded spindles found on sanders and grinders typically sold in Europe. The disc pad hub has an M14-2 internal threaded metal insert that fits an M14-2 threaded spindle (where the spindle is 14 millimeters in diameter with 2 millimeter pitch).
Our 3M Disc Pad Hub enables operators to select face plates with four different levels of flexibility (soft, medium, hard and extra-hard). The disc pad hub holds a face plate firmly in position, and a center hole fiber disc is secured to the tool spindle with the retainer nut.
Disc pad hub and retainer nut has a M14-2 INT thread for use on grinders with M14-2 threaded spindle and can be used on all 3M Fiber Disc face plates. Use with 4-1/2 inch through 9 inch Fiber Discs with 7/8″/22mm center hole.
