-
×
Dynabrade 96101 Dynabrade Air Lube 10W/NR 24 Per Box
2 × $385.42 -
×
Dynabrade 11475 Dynabelter Abrasive Belt Tool, Standard Duty
1 × $1,520.00 -
×
Dynabrade 96243 Bearing Press Tool
1 × $59.99 -
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,245.00 -
×
Dynabrade 53270 7" (180 mm) Dia. Right-Angle Disc Sander
1 × $1,585.00 -
×
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
1500 × $0.60 -
×
Insize 0020-A199, VIBRATION PEN (THREE PARAMETERS), 6974029777059
1 × $1,044.21 -
×
Dynabrade 40610 Electric Dynafile II Abrasive Belt Tool
1 × $420.00 -
×
3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737
240 × $8.38 -
×
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
200 × $1.61 -
×
Insize 6143, DEPTH STOP FOR CALIPERS, 6928640371301
1 × $18.63
-
×
3M 11137, Roloc Disc 361F, 50 YF-weight, TR, 1-1/2 in, Die R150S, 7000045094
1000 × $0.73 -
×
3M 77559, Cubitron II Hookit Cloth Disc 784F, 77559, 36+ to 120+, 5 in x NH, Die 500X, 7100232738
300 × $6.03 -
×
Dynabrade 91166 1/2" W x 13" L 80 Grit A/O DynaCut Belt, 50/pack
50 × $1.95 -
×
3M 22405, Roloc Disc 361F, P100 YF-weight, TR, 3 in, Die R300V, 7000045102
200 × $1.25 -
×
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
400 × $1.50 -
×
Dynabrade 95821 Dynabrade Air Lube 10W/NR, 4oz Bottle
1 × $18.00 -
×
3M 26122, PPS Series 2.0 Cup, Midi (13.5 fl oz, 400 mL), 7100135960, 2 per carton
4 × $18.15 -
×
Insize 0210-G260, INFRARED THERMOMETER (BASIC TYPE), -22 ?F~500?F/-30?C~260?C, 6974029773310
1 × $66.86
-
×
Dynabrade 95848 Dynabrade Gear Oil
1 × $12.98 -
×
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
200 × $1.74 -
×
3M 22408, Roloc Disc 361F, P100 YF-weight, TR, 1-1/2 in, Die R150S, 7000045101
500 × $0.67
3M 28322, Clean Sanding Soft Interface Disc Pad, 6 in x 1/2 in 52 Holes, 7100005497
$17.66
Factory Stock, 7-10 Day Leadtime
3M Soft Interface Disc Pad is constructed of _ inch soft density foam with a 3M Clean Sanding hole pattern to allow dust extraction and minimize loading during sanding. The soft foam construction enables the pad to conform to edges and contours, making it a good match for sensitive workpieces where gouging and marring is a top concern.
Providing Cushion and Conformability
3M Soft Interface Disc Pad provides a greater cushion and more conformability than a pad with medium density foam. Use this pad to reduce edge cutting when the pad is tipped on edge and maintain closer contact with the edge while maximizing dust extraction. The pad contains a series of uniquely designed holes which match those in 3M Clean Sand Back Up Pads, allowing sanding dust to be pulled through the holes and away from the sanding surface. This improves the work environment and prolongs disc life.
Easy Attachment
The Soft Interface Disc Pad has two sides. One side features loop material, which attaches to the back up pad used on the sanding tool. The opposite side contains hook material, which attaches to the Hookit sanding disc of choice.
Altogether, our 3M Soft Interface Disc Pad is ideal for operators who seek an added level of conformability for their sanding projects. The responsive foam design, attachment system and Clean Sanding hole pattern combine to cushion the workpiece, minimize dust and ? ultimately ? get the job done.
