-
×
3M 22408, Roloc Disc 361F, P100 YF-weight, TR, 1-1/2 in, Die R150S, 7000045101
1000 × $0.67 -
×
Dynabrade 91166 1/2" W x 13" L 80 Grit A/O DynaCut Belt, 50/pack
50 × $1.95 -
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,245.00 -
×
3M 01328, PSA Cloth Disc 348D, P180 X-weight, 3 in x NH, Die 300V, 7000045068
200 × $0.95 -
×
Dynabrade 95842 Dynabrade Air Lube 10W/NR, 1 Pint
1 × $25.78 -
×
3M 08916 Scotch-Brite Surface Conditioning Belt, SC-BS, A/O Medium, 2 in x 60 in, 7010309628
10 × $30.29 -
×
Dynabrade 96101 Dynabrade Air Lube 10W/NR 24 Per Box
1 × $385.42 -
×
Norton 66254497067 - 2" X 1/4" 100 - 150 Grit Medium Grade Aluminum Oxide Vortex Rapid Blend Blue TR Non-Woven Abrasive Disc, 25 Each
25 × $4.53 -
×
3M 71358, 641WY 1/4" X 24", 600 Mesh Diamond Cloth Belt, 7010534894
1 × $9.18 -
×
3M 65033, Scotch-Brite Diamond Wheel, 645DC 6 in x 1/2 in x 1 in, 7010365574, Box of 3
1 × $531.70 -
×
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
500 × $0.67 -
×
3M 11414, Roloc Disc 361F, P120 XF-weight, TR, 1 in, Die R100N, 7000045104
500 × $0.58 -
×
3M 06728, Premium Plastic Sheeting with 233+ Masking Tape (36 mm), 16
ft x 400 ft, 7100139893
1 × $87.14 -
×
Dynabrade 91165 1/2" W x 13" L 60 Grit A/O DynaCut Belt, 50/pack
50 × $1.95
-
×
3M 21762, Stikit Cloth Disc Roll 341D, 60 X-weight, 6 in x NH, Die 600Z, 7000118780
400 × $169.03 -
×
Dynabrade 53270 7" (180 mm) Dia. Right-Angle Disc Sander
1 × $1,585.00 -
×
Standard Abrasives 32938, PSA A/O Disc, 710322, 3/4 in x NH, 120, 7000121791
100 × $0.10 -
×
3M 11412, Roloc Disc 361F, 36 YF-weight, TR, 1 in, Die R100N, 7000045092
500 × $0.60
3M 28321, Clean Sanding Soft Interface Disc Pad, 5 in x 1/2 in 44 Holes, 7100009658
$15.18
Factory Stock, 7-10 Day Leadtime
3M Soft Interface Disc Pad is constructed of _ inch soft density foam with a 3M Clean Sanding hole pattern to allow dust extraction and minimize loading during sanding. The soft foam construction enables the pad to conform to edges and contours, making it a good match for sensitive workpieces where gouging and marring is a top concern.
Providing Cushion and Conformability
3M Soft Interface Disc Pad provides a greater cushion and more conformability than a pad with medium density foam. Use this pad to reduce edge cutting when the pad is tipped on edge and maintain closer contact with the edge while maximizing dust extraction. The pad contains a series of uniquely designed holes which match those in 3M Clean Sand Back Up Pads, allowing sanding dust to be pulled through the holes and away from the sanding surface. This improves the work environment and prolongs disc life.
Easy Attachment
The Soft Interface Disc Pad has two sides. One side features loop material, which attaches to the back up pad used on the sanding tool. The opposite side contains hook material, which attaches to the Hookit sanding disc of choice.
Altogether, our 3M Soft Interface Disc Pad is ideal for operators who seek an added level of conformability for their sanding projects. The responsive foam design, attachment system and Clean Sanding hole pattern combine to cushion the workpiece, minimize dust and ? ultimately ? get the job done.
