-
×
3M 11137, Roloc Disc 361F, 50 YF-weight, TR, 1-1/2 in, Die R150S, 7000045094
500 × $0.73 -
×
3M 45714, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 3 in x NH, D/F 3HL, Die 300BE, 7100113113
1 × $0.86 -
×
3M 22395, Roloc Disc 361F, 60 YF-weight, TR, 3 in, Die R300V, 7000045098
200 × $1.33
-
×
Standard Abrasives 863110, A/O Unitized Wheel, 631, 2 in x 1/4 in x 1/4 in, 7000144629
10 × $5.31 -
×
3M 53915, Performance Plus Duct Tape 8979N (Nuclear), Red, 72 mm x 54.8 m, 12.1 mil, 7010334653
12 × $50.09 -
×
3M 22405, Roloc Disc 361F, P100 YF-weight, TR, 3 in, Die R300V, 7000045102
400 × $1.25 -
×
3M 33446, Cubitron II File Belt, 80+, 1/2 in x 18 in (12.7 mm x 457.2 mm), 7100033186, 10 belts per carton, 5 cartons per case
10 × $34.22 -
×
Dynabrade 51863 .7 hp Trim Router (Complete), 20,000 RPM, 1/4 Collet
1 × $742.58 -
×
ACS CX1250 Diamond Belts, 1/2" X 24" 45u
12 × $7.60 -
×
3M 10119, Synthetic Steel Wool Pad 10119NA, 0000 Super Fine, 7000126181
18 × $2.69 -
×
3M 26130, PPS Series 2.0 Adapter, Type S35, 16 mm Female, 1.5 mm
Thread Stretched, 7100135926
1 × $25.96 -
×
Insize 1179-300WL, WIRELESS DIGITAL RTJ RING GROOVE CALIPER, 10-300mm/0.4-12", 0.01mm/0.0005", 6940561961010
1 × $619.53 -
×
Insize 4102-136, STEEL GAGE BLOCK SET, 36pcs, grade AS-1, 6928640329876
1 × $416.78
-
×
3M 66261, Wind Protection Tape Edge Sealer W2600, 50 ml (1.7 fluid ounce), 7000049496, 12/Case
12 × $69.98 -
×
3M 03999 Scotch-Brite Surface Conditioning Belt, SC-BS, A/O Medium, 2 in x 132 in, 7010309300
5 × $51.26 -
×
3M 11412, Roloc Disc 361F, 36 YF-weight, TR, 1 in, Die R100N, 7000045092
500 × $0.60 -
×
3M 26006, PPS Series 2.0 Adapter, Type S5, 12 mm Male, 1.5 mm Thread, 7100135831
1 × $25.96 -
×
Standard Abrasives 713297, Aluminum Oxide Handy Roll, P120 J-weight, 2 in x 50 yd, 7100031623
1 × $47.66 -
×
Insize 0010-A35, SOUND LEVEL METER, 35dB~130dB, 6974029777004
1 × $170.80
-
×
3M 11419, Roloc Disc 361F, P240 XF-weight, TR, 2 in, Die R200P, 7000045105
200 × $0.97 -
×
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
200 × $1.61
3M 27628, Flange Adapter 6 in Radial Bristle Brush Set, 2 in x 1 in, 7000028515
$6.57
Factory Stock, 7-10 Day Leadtime
3M Flange Adapter holds together a minimum of seven 6 inch radial bristle discs for use on bench motors with a shaft size of 1 inch diameter.
For bench motors with shafts smaller than 1 inch, a 3M™ Telescoping Wheel Flange Adapter (Part No. 5) can be inserted into the center hole to fit 1/2 inch, 5/8 inch, 3/4 inch or 7/8 inch shafts. When a greater thickness of bristle discs is needed, 3M™ Spindle Extender Adapters (Part No. 30134) can be added to increase the disc capacity of the flange adapter. These additional adapters are sold separately.
