-
×
3M 29831, Sanding Screen, 180 Grit, 18 in x NH, 7100160238
12 × $5.83 -
×
3M 05207, Hookit Sanding Block D/F, 70MM x 127MM, 7100007814
5 × $114.79 -
×
3M 29834, Sanding Screen, 100 Grit, 18 in x NH, 7100160819
12 × $7.56 -
×
3M™ 17379, Versaflo™ Length Adjusting Breathing Tube BT-30, 7100009685, 1 EA/Case
2 × $80.58 -
×
3M 29848, Sanding Screen, 180 Grit, 15 in x NH, 7100160815
12 × $4.03 -
×
3M™ 53797, Flexible Diamond Belt 6451J, 1/2" Dia x 18" L, M125 Micron, Type G, Pattern B2, 7010509272
3 × $43.00 -
×
3M™ 72122, Portable Compressed Air Filter and Regulator Panel 256-02-01, 100 cfm, 8 outlets, with Carbon Monoxide Monitor, 7000052147, 1 EA/Case
1 × $6,424.71 -
×
3M 77559, Cubitron II Hookit Cloth Disc 784F, 77559, 36+ to 120+, 5 in x NH, Die 500X, 7100232738
300 × $6.03 -
×
3M 77197, Scotch-Brite™ Roloc™ Deburr and Finish PRO Unitized Wheel,TR, 3 in x 1/8 in x NH, 8C CRS+, 7100109130, 40/box
40 × $11.06 -
×
3M 09099, Scotch-Brite Paint and Rust Stripper Large Area 9099NA, 7010375230
6 × $7.45 -
×
3M 45188, Stikit Disc Hand Pad, 5 in x 1/8 in, 7100015524
20 × $7.52 -
×
Dynabrade 22092 2-3/4" x 17" Hand Sanding Block
1 × $112.26 -
×
Dynabrade 78425 4-1/2" Dia. x 3/8" Coarse DynaBrite Surface Conditioning Disc, 25/pack
25 × $6.68 -
×
3M 05519, Sanding Block, Rubber, 2-3/4 in x 5 in, 7000000587
10 × $18.37 -
×
3M 62607, Scotch-Weld Threadlocker TL42, Blue, 250 mL Bottle, 7100039192, 2/case
2 × $126.95 -
×
3M 50216, Temflex Cotton Friction Tape 1755, 3/4 in x 82-1/2 ft, Black, 7010297809
60 × $10.08 -
×
3M 45714, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 3 in x NH, D/F 3HL, Die 300BE, 7100113113
1 × $0.86
3M 27628, Flange Adapter 6 in Radial Bristle Brush Set, 2 in x 1 in, 7000028515
$6.57
Factory Stock, 7-10 Day Leadtime
3M Flange Adapter holds together a minimum of seven 6 inch radial bristle discs for use on bench motors with a shaft size of 1 inch diameter.
For bench motors with shafts smaller than 1 inch, a 3M™ Telescoping Wheel Flange Adapter (Part No. 5) can be inserted into the center hole to fit 1/2 inch, 5/8 inch, 3/4 inch or 7/8 inch shafts. When a greater thickness of bristle discs is needed, 3M™ Spindle Extender Adapters (Part No. 30134) can be added to increase the disc capacity of the flange adapter. These additional adapters are sold separately.
