-
×
3M 94738, Cubitron ll Cloth Belt 947A, 120+ X-weight, 6 in x 48 in, Film-lok, Single-flex, 7010299911, 20 per case
20 × $18.52 -
×
Insize PHT-C751, PENCIL HARDNESS TESTER, 6974029779862
1 × $696.79 -
×
Dynabrade 53533 Cone or Plug Grinder (Triple Extension)
1 × $1,493.91 -
×
Dynabrade 11477 Dynabelter Abrasive Belt Tool, Heavy-Duty
1 × $2,583.72 -
×
Insize 3281-5, SCREW THREAD MICROMETER, 4-5", 6928640328244
1 × $245.21
-
×
3M 87429, Final Finishing Pads 10199NA4PK, 3 3/4 in x 6 in x 5/8 in, Replaces 0000 Steel Wool, 7100096075, 4 pads per pack
6 × $3.12 -
×
3M 82511, Steel Mesh Faceshield Screen W96MW 82511-00000, with Clear Eyeshield, Headgear Not Included 10 EA/Case, 7000127231
1 × $701.18
-
×
Insize 0020-A199, VIBRATION PEN (THREE PARAMETERS), 6974029777059
1 × $1,044.21
-
×
ACS CX1250 Diamond Belt, 1/2" X 24" 125u
12 × $7.60 -
×
Dynabrade 55064 3/8"-24 Female 5/8"-11 Male, 1" Length
1 × $37.26 -
×
Insize 4630-1E, TAPER GAGE, .01"-.15", 6928640330124
1 × $71.66
-
×
Insize MLP-CM60-CUT2, CUTTING BLADE, 250_1.5_25.4mm, 6940561949094
1 × $1,018.98
-
×
3M 97421, Aluminum Foil Tape 3380, Silver, 72 mm x 45 m, 3.25 mil, 7010375681
16 × $25.36 -
×
Dynabrade 15420 Dynafile III Abrasive Belt Tool
1 × $963.87 -
×
3M 90126, Scotch-Brite Deburr and Finish PRO Unitized Wheel, 2 in x 3/4 in x 1/4 in, 8C CRS+, 7100105584
20 × $12.67 -
×
Insize 2307-1R, REVERSE READING DIAL INDICATOR, 1", lug back, 6928640396649
1 × $44.71
-
×
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
500 × $0.60 -
×
Dynabrade 51700 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet
1 × $531.79 -
×
3M 22395, Roloc Disc 361F, 60 YF-weight, TR, 3 in, Die R300V, 7000045098
200 × $1.33
3M 22972, Disc Holder Adapter 9, 5/8-11 External M10-1.50 Internal, 7000046095
$14.65
Factory Stock, 7-10 Day Leadtime
Our 3M Disc Holder Adapter is used to attach abrasive disc holders with 5/8-11 center holes onto power tools equipped with smaller spindles. The interior threads screw onto the shaft of a sander or other power tool, effectively increasing the size of the tool shaft to accommodate a product with 5/8-11 disc holders.
Added Adaptability
The 3M Disc Holder Adapter is a simple way to equip your power tools and sanders to use larger 5/8-11 threaded disc holders or quick change (integral 5/8-11 hub) abrasive products. The adapter conveniently screws onto the tool spindle and converts the smaller external threaded shaft to a 5/8-11 external threaded shaft. This allows you to use an even larger array of discs without needing to buy a completely new tool.
