The open-web fiber runs cool and resists loading while the aluminum oxide abrasives provide a high cut-rate for consistent finishing. The 3M Roloc attachment system gives you quick and easy disc change-out, making the SE Roloc disc ideal for heavy duty deburring and finishing.
SE surface conditioning discs use aluminum oxide abrasive. Aluminum oxide is a popular choice among industrial professionals because of its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.
Our 3M Roloc TR, TS, and TSM quick change discs are smaller discs that easily and quickly attach onto a Roloc disc pad (sold separately) so that you can conveniently change discs from job to job or in multi-step finishing processes. Our 3M Roloc Quick Change Attachment System provides a secure attachment even for heavy-duty applications, and the variety of available Roloc discs allows swapping from one application to the next in seconds. Each disc is also color-coded to identify its grade, making it easy to grab the grade required for different applications.
We developed Scotch-Brite surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool, reducing the risk of part discoloration and warping. The fibers are load resistant and keep the abrasive minerals cutting at high performance by limiting clogging of the fibers, which also extends the life of the disc.

Dynabrade 78423 4-1/2" Dia. x 3/8" Very Fine DynaBrite Surface Conditioning Disc, 25/pack
3M 22396, Roloc Disc 361F, 36 YF-weight, TR, 1-1/2 in, Die R150S, 7000045091
3M 97419, Aluminum Foil Tape 3380, Silver, 48 mm x 45 m, 3.25 mil, 7000049613
3M 10118, Synthetic Steel Wool Pads, 10118NA, #0 Fine, 7000126148
3M 50010, VentureClad Insulation Jacketing Tape 1577CW-WME, White, 99 mm x 13.7 m, 7010379907
Insize 0120-IM24, INDUCTIVE MOISTURE METER, 0~100%, 6974029776588
3M 20910, PSA Cloth Disc 348D, 60 X-weight, 2 in x NH, Die 200P, 7000118872
3M 11137, Roloc Disc 361F, 50 YF-weight, TR, 1-1/2 in, Die R150S, 7000045094
3M™ 72016, Remote Alarm & Strobe 529-05-20, Audible, 7000131708, 1 EA/Case
3M 93949, General Purpose Sanding Sponge CP040-3PK, Single Angle, 2-7/8 in x 4-7/8 in x 1 in, Fine, 7100175194, 3/pack
3M 22409, Roloc Disc 361F, P120 XF-weight, TR, 1-1/2 in, Die R150S, 7000045103
3M 77559, Cubitron II Hookit Cloth Disc 784F, 77559, 36+ to 120+, 5 in x NH, Die 500X, 7100232738
3M 66630, Cloth Belt 341D, 50 X-weight, 6 in x 48 in, Film-lok, Single-flex, 7000118864, 20 per case
3M 11412, Roloc Disc 361F, 36 YF-weight, TR, 1 in, Die R100N, 7000045092
Standard Abrasives 711444, A/O Straight Cartridge Roll, 1/4 in x 1 in x 1/8 in 180, 7100080017
Norton 66261014936 3" DIA X 1/8" Thick, Bear-Tex NEX Rapid Blend Quick-Change Type III Non-Woven Unified Wheel, 40 Each
3M 10116, Synthetic Steel Wool Pads, 10116NA, #2 Medium, 2 in x 4 in, 7000047708
3M 49941, Roloc Disc 361F, 80 YF-weight, TSM, 3 in, Die RS300VM, 7000148151
Dynabrade 51705 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 50,000 RPM, 3/32" Collet
Dynabrade 95842 Dynabrade Air Lube 10W/NR, 1 Pint
3M 97421, Aluminum Foil Tape 3380, Silver, 72 mm x 45 m, 3.25 mil, 7010375681
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097 
