-
×
3M™ 72787, Calibration Kit 529-04-48, Large, 7000052154, 1 EA/Case
1 × $2,465.15 -
×
Standard Abrasives 260013, Cross Buff Kit 260013, 7000121667
5 × $58.18 -
×
Standard Abrasives 727399, Buff and Blend Cross Buff HS, A/O Medium, 2 in x 3/4 in x 2 Ply x 1/4-20, 7000047137
25 × $7.71 -
×
Dynabrade 78122 2" Dia. Medium NWN DynaBrite Locking-Type Disc, 25/pack
25 × $1.79 -
×
Standard Abrasives 713276, Aluminum Oxide Handy Roll, P180 J-weight, 2 in x 50 yd, 7100037246
1 × $52.38 -
×
3M 20967, Portable Utility Cloth Roll 314D, P240 J-weight, 1 in x 20 yd, 7010290604
5 × $17.83 -
×
3M 13171, Scotch-Brite Multi-Finishing Wheel, MU-WL, 2S Medium, 6 in x 1 in x 1 in, 7000136469
3 × $55.68 -
×
Dynabrade 11684 Dynabelter Contact Arm Assembly 4" DIA X 5/8" W., 40 Duro Serrated
1 × $438.51 -
×
Dynabrade 90875 2" Dia. Super Fine NWN DynaBrite Locking-Type Disc, 25/pack
25 × $43.25 -
×
Standard Abrasives 713297, Aluminum Oxide Handy Roll, P120 J-weight, 2 in x 50 yd, 7100031623
1 × $52.38 -
×
Norton 66261014921 - 2" X 1/8" 50 - 80 Grit Coarse Grade Aluminum Oxide Bear-Tex Speed-Lok Rapid Blend Gray TR Non-Woven Unified Wheel, 60 Each
60 × $6.44 -
×
Dynabrade 92585 3-1/2" Dia. x Medium Hook-Face Surface Conditioning DynaBrite Disc, 10/pack
10 × $2.70 -
×
3M 19795, Utility Cloth Roll 314D, P400 J-weight, 1-1/2 in x 20 yd, 7100081717
5 × $47.61 -
×
Standard Abrasives 725011, Buff and Blend Cross Buff HP, A/O VFN, 3/4 in x 3/8 in x 2 Ply x 8-32, 7000047134
50 × $4.12 -
×
Norton 66254414832 - 3" X 1/4" X 1/4" Vortex Rapid Blend Unified Wheel, 5am U2305, 40 Each
40 × $11.50 -
×
Norton 66254497067 - 2" X 1/4" 100 - 150 Grit Medium Grade Aluminum Oxide Vortex Rapid Blend Blue TR Non-Woven Abrasive Disc, 25 Each
25 × $4.53 -
×
3M 26582, Accuspray Refill Pack for PPS Series 2.0, Blue, 1.2 mm, 7100152952
5 × $10.20 -
×
3M 01326, PSA Cloth Disc 348D, P240 X-weight, 3 in x NH, Die 300V, 7000045069
200 × $1.05
3M 15060, Roloc + Button 7, 3/8 in Red, 7000045945
$6.18
Factory Stock, 7-10 Day Leadtime
Our 3M Roloc+ Button plays an important role in the 3M Roloc+ Attachment system, and it’s designed to drive 3M Unitized Wheels that contain a 3/8″ inch center hole.
Extended Shank Allows Side Loading
A threaded shank on the 3M Roloc + Button passes through the unitized wheel’s 3/8″ center hole and twists into a Roloc + holder. (Note: The Roloc + holder comes in the 3M Roloc+ Button Combination Pack or can be purchased separately). Then, the 3M Roloc + holder (sold separately) can be mounted on the power tool, most commonly on tools featuring a _? collet chuck. The 3M Roloc+ Button has an extended load bearing shank, which provides added bending strength for applications using Unitized Wheels where side loading occurs.
