-
×
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
200 × $1.74 -
×
ACS Flap Disc, Type 29 (Curved) Full Diamond 4-1/2 X 5/8-11 60M, 333.FD4.5-60/T29
1 × $52.00 -
×
Dynabrade 95843 Dynabrade Air Lube 10W/NR, 1 Gallon
1 × $104.07 -
×
3M 05519, Sanding Block, Rubber, 2-3/4 in x 5 in, 7000000587
10 × $18.37 -
×
3M 05530, Stikit Soft Hand Pad, 2-3/4 in x 5-1/2 in x 3/8 in, 7000028351
50 × $5.53 -
×
3M 77559, Cubitron II Hookit Cloth Disc 784F, 77559, 36+ to 120+, 5 in x NH, Die 500X, 7100232738
300 × $6.03 -
×
3M 05520, Sanding Block, Rubber, 2-3/4 in x 8 in, 7000028366
10 × $24.73 -
×
Standard Abrasives 717078, Cartridge Roll Mandrel, 3/32 in x 3/4 in x 1/4 in x 1 in x 2-3/4 in CM-2E, 7000121813
5 × $4.88 -
×
3M 22396, Roloc Disc 361F, 36 YF-weight, TR, 1-1/2 in, Die R150S, 7000045091
500 × $0.75 -
×
3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737
240 × $8.38 -
×
3M 34573, Cubitron II Net Sheet Roll, 120+, 115 mm x 10 m, 7100247507, 6 Rolls/Case
6 × $43.97 -
×
3M 02590, Stikit Gold Sheet Roll, P400, 2-3/4 in x 45 yd, 7000028254
10 × $62.51 -
×
Standard Abrasives 710190, Cartridge Roll Mandrel, 2560020, 1/8 in x 1 in x 1/4 in x 1-1/4 in x 2-3/4 in CM-9, 7000121790
5 × $4.17 -
×
3M 40466, VentureClad Plus Insulation Jacketing Tape Embossed 1579GCW-E, Natural, 30 in x 25 yd, 7100214292
1 × $839.60 -
×
ACS Diamond Cloth Belt, CX1250 3" X 30" 45U
2 × $57.10 -
×
3M 11137, Roloc Disc 361F, 50 YF-weight, TR, 1-1/2 in, Die R150S, 7000045094
1000 × $0.73 -
×
Dynabrade 14000 Dynafile Abrasive Belt Tool
1 × $699.72 -
×
3M 34555, Cubitron II Net Sheet Roll, 240+, 80 mm x 10 m, 7100247339, 6 Rolls/Case
6 × $31.57 -
×
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
400 × $1.50 -
×
3M 94700, Cubitron ll Cloth Belt 947A, 60+ X-weight, 1/4 in x 24 in, Fabri-lok, Single-flex, 7010360589, 200 per case
1 × $2.40
3M 09306, Regalite Floor Surfacing Discs, 7 in x 7/8 in, 752I, P120 Grit, 7010314925
$0.79
Factory Stock, 7-10 Day Leadtime
3M floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite mineral, and tough paper backing.
3M Resinite Floor Surfacing Discs are precut. Sharp, fast cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
