-
×
Dynabrade 53270 7" (180 mm) Dia. Right-Angle Disc Sander
1 × $1,585.00 -
×
Standard Abrasives 713296, Aluminum Oxide Handy Roll, P320 J-weight, 2 in x 50 yd, 7100034517
1 × $52.38 -
×
Norton 66623325035 - 2" 120 Grit Fine Grade Aluminum Oxide Vortex Rapid Prep Green TR Non-Woven Surface Preparation Disc, 50 Each
50 × $1.70 -
×
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
500 × $0.74 -
×
Dynabrade 14360 Pneumatic Pipe Belt Finisher
1 × $1,679.00 -
×
Dynabrade 64350 26" W x 36" L (660 mm W x 914 mm L) Metal Capture Downdraft Station, 230 V (AC)
1 × $18,352.22 -
×
Norton 66252843323 - 4 -1/2" X 1/8" X 5/8" Center Hub, NORZON PLUS Type 27 Depressed Center Cut Off And Grinding Wheel, 10 Each
10 × $10.68 -
×
3M 19769, Utility Cloth Sheet 314D, 9 in x 11 in P150 J-weight, 7000000357
250 × $1.57 -
×
3M 71358, 641WY 1/4" X 24", 600 Mesh Diamond Cloth Belt, 7010534894
1 × $10.47 -
×
NORTON 66623313925 - 2" Dia. Blaze Rapid Blend Quick-Change TS (TYPE II) Non-Woven Disc, 25 Each
25 × $5.29 -
×
Standard Abrasives 724277, Buff and Blend Circle Buff GP, A/O Very Fine, 2 in x 2 Ply x 8-32, 7010368699
25 × $7.30 -
×
Dynabrade 11475 Dynabelter Abrasive Belt Tool, Standard Duty
1 × $1,520.00 -
×
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
200 × $1.91 -
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,245.00 -
×
Dynabrade 11684 Dynabelter Contact Arm Assembly 4" DIA X 5/8" W., 40 Duro Serrated
1 × $438.51 -
×
Dynabrade 51708 .1 hp Straight-Line Pencil Grinder, 35,000 RPM, 3/32" Collet
1 × $558.00 -
×
Norton 66261126299 - 2" X 50 Yard 80 Grit Metalite™ Aluminum Oxide Cloth Roll, 1 Each
1 × $59.33 -
×
ACS Diamond Cloth Belt, CX1250 3/8" X 24" 75U
16 × $5.80 -
×
Dynabrade 11477 Dynabelter Abrasive Belt Tool, Heavy-Duty
1 × $2,712.00 -
×
Norton 66254414832 - 3" X 1/4" X 1/4" Vortex Rapid Blend Unified Wheel, 5am U2305, 40 Each
40 × $11.50 -
×
Dynabrade 11486 Dynabelter Accu-Grinder Abrasive Belt Tool, Heavy-Duty
1 × $2,022.00 -
×
Dynabrade 64404 36" W x 60" L (914 mm W x 1,524 mm L) Metal Capture Downdraft Table, 230 V (AC), Side Exhaust
1 × $28,988.00 -
×
3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
500 × $0.74
3M 07545, Brake Hub Cleaning Disc Holder, 7000121093
$26.37
Factory Stock, 7-10 Day Leadtime
The 3M Brake Hub Cleaning Disc Holder is used to attach and hold our brake hub cleaning discs to die grinders or right angle disc sanders. Our 3M Brake Hub Cleaning Disc Holder and associated discs are designed to remove rust and corrosion from metal surfaces, particularly around wheel studs on brake drums or rotors.
Quick Rust Removal
We designed the 3M™ Brake Hub Cleaning Disc Holder as an essential piece of our brake hub cleaning product line. When used along with our Scotch-Brite™ Roloc™ Brake Hub Cleaning Disc, these components allow operators to achieve quick rust removal on the brake drums and rotors.
Easy Attachment
This disc holder attaches to any die grinder or drill and provides a hard supporting surface for your abrasive pads. Pads twist and lock tightly into the holder while still being easy to remove and change thanks to our Roloc™ attachment design. The holder’s length and central hole allow you to remove rust around the wheel studs.
Clean Brake
Cleaning the brake hub is an important step in reducing the potential for misalignment between the hub and wheel. Misalignment between the brake hub and wheel can lead to drivability concerns like brake pedal pulsation or steering wheel shimmy. As corrosion may prevent proper hub and wheel alignment, 3M™ has designed the Brake Hub Cleaning products to give operators a quick and effective means of removing rust from brake rotors and drums, particularly around wheel studs.
