3M Screen Cloth Disc Hand Pad Goes Hand in Hand with 3M Screen Cloth Discs
3M Screen Cloth Disc Hand Pad goes hand in hand with 3M Screen Cloth Discs. Use die numbers 500GC (5? diameter with 2 tabs), 600JR (6? diameter with 2 tabs) and 800JM (8? diameter with 2 tabs) (sold separately). Mineral is adhered to both sides of 3M screen cloth discs, so when one side of the disc wears down the other may be used. While operators typically use these discs dry during hand sanding, the screen is water resistant and may be used with a lubricant if necessary.
Each disc features two tabs. The holder pad has two ?tacks? designed for these tabs. Operators simply pierce the tabs on the disc with the tacks on the hand pad to secure the disc in place. This easy and convenient attachment system eliminates the need for adhesive, which has two key benefits. First, it helps minimize the mess that adhesive can sometimes cause. Second, as one side of the disc is not sacrificed for adhesive, both sides may be used and the disc is put to optimal use.
A Remedy for Small Surface Imperfections
When eliminating surface imperfections, evenly-applied pressure and consistent finishes tend to be top concerns. With these goals in mind, we created the 3M Screen Cloth Disc Hand Pad. This abrasive accessory helps operators apply even pressure to their 3M screen cloth discs and, consequently, the substrate. With a hand strap attached to the back of the pad, the accessory is easy to use and provides access to workpiece areas that may be hard to reach with machines.
This hand pad is available in soft and medium densities. A medium density pad is firmer ? a good match for highlighting or leveling the surface to reveal high and low spots. A soft density pad is a good match for light scuffing of the substrate.
Prior to applying primer or paint, ridding the substrate of small imperfections is no easy task. We know that operators value a clean, polished look. The 3M Screen Cloth Disc Hand Pad was engineered to help them get there.

3M™ 72016, Remote Alarm & Strobe 529-05-20, Audible, 7000131708, 1 EA/Case
3M™ 17379, Versaflo™ Length Adjusting Breathing Tube BT-30, 7100009685, 1 EA/Case
3M 22409, Roloc Disc 361F, P120 XF-weight, TR, 1-1/2 in, Die R150S, 7000045103
3M™ 07010, Supplied Air Respirator Hose W-9435-25/07010(AAD), 25 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005374, 1 EA/Case
Insize HDT-LP200-C, IMPACT DEVICE C for HDT-LP200, 6940561948417
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
3M 62606, Scotch-Weld Threadlocker TL42, Blue, 50 mL Bottle, 7100039193, 10/case
3M 25139, Scotch-Weld Threadlocker TL43, Blue, 50 mL Bottle, 7100039222, 10/case
ACS CX1250 Diamond Belts, 1/2" X 24" 45u
3M 13718, Scotch-Brite EXL Unitized Wheel, XL-UW, 2S Fine, 3 in x 3/4 in x 1/4 in, 7000046025
3M 62605, Scotch-Weld Threadlocker TL42, Blue, 10 mL Bottle, 7100039190, 10/case
3M 50216, Temflex Cotton Friction Tape 1755, 3/4 in x 82-1/2 ft, Black, 7010297809
Standard Abrasives 840032, Quick Change Surface Conditioning FE Disc, A/O Medium, TSM, Maroon, 3/4 in, QS75KM, 7000046846, 50/case
3M 29860, Sanding Screen, 120 grit, 12 in x 18 in, 7100160860
3M 71883, Flexible Diamond Hand File 6210J, No 2, White, 18, N20, 7000082161, 10 Per Case
3M 16151, PTFE Glass Cloth Tape 5451, Brown, 3/4 in x 36 yd, 5.6 mil, 7000050135
3M 20910, PSA Cloth Disc 348D, 60 X-weight, 2 in x NH, Die 200P, 7000118872
3M 01326, PSA Cloth Disc 348D, P240 X-weight, 3 in x NH, Die 300V, 7000045069
3M 29835, Sanding Screen, 80 Grit, 18 in x NH, 7100160844
3M 27551, EMI Copper Foil Shielding Tape 1181, 1/2 in x 18 yd (12.70 mm x 16.5m), 7000132182
ACS Diamond Cloth Belt, CX1250 3/4" X 18" 250U
3M 66625, Cloth Belt 341D, 36 X-weight, 6 in x 48 in, Film-lok, Single-flex, 7000118861, 20 per case
3M 87179, Scotch-Weld Epoxy Adhesive 2216NS, Tan, Part B, 5 Gallon Drum (Pail), 7010309882
3M 82238, Scotch-Weld Epoxy Adhesive 420, Off-White, Part B, 5 Gallon Drum(Pail), 7100001145
3M™ 17323, Versaflo™ Respiratory Helmet Assembly M-407, with Premium Visor and Flame Resistant Shroud, 7000002395, 1 EA/Case
3M 11414, Roloc Disc 361F, P120 XF-weight, TR, 1 in, Die R100N, 7000045104
3M 14896, Cloth Belt 777F, 80 YF-weight, 2 in x 48 in, Film-lok, Single-flex, 7000118455, 50 per case
3M 17085, Versaflo Hood with Integrated Head Suspension, S-433S-5, Small/Medium, 7000127431, 5 EA/Case
3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
3M 45714, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 3 in x NH, D/F 3HL, Die 300BE, 7100113113
3M 71361, 641WY 1/4" X 24", 1200 Mesh Diamond Cloth Belt, 7010534916
3M™ 72010, Replacement Filter Kit 523-01-29, 7000056891, 1 EA/Case
Dynabrade 64404 36" W x 60" L (914 mm W x 1,524 mm L) Metal Capture Downdraft Table, 230 V (AC), Side Exhaust
3M 08405, Flexiclear Body Seam Sealer, 1/10 gal cartridge, 7000121530, 12 per case
3M 22404, Roloc Disc 361F, 80 YF-weight, TR, 3 in, Die R300V, 7000045100
3M 16159, PTFE Glass Cloth Tape 5453, Brown, 3/4 in x 36 yd, 8.2 mil, 7000050132
3M 87103, Cloth Belt 341D, 24 X-weight, 9 in x 20 in, Fabri-lok, Single-flex, 7010326200, 20 per case
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737
3M 20928, PSA Cloth Disc 348D, P180 X-weight, 1 in x NH, Die 100N, 7000118917
3M 70894, 641WY 1/2" X 24", 100 Mesh Diamond Cloth Belt, 7010533228
3M 76733, Cloth Belt 777F, 80 YF-weight, 6 in x 48 in, Film-lok, Single-flex, 7000118454, 20 per case
3M 40145, Thermosetable Glass Cloth Tape 3650, White, 8.3 mil, 7 in x 60 yd, 7100198501
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
3M 01328, PSA Cloth Disc 348D, P180 X-weight, 3 in x NH, Die 300V, 7000045068
Dynabrade 53533 Cone or Plug Grinder (Triple Extension) 
