-
×
Dynabrade 11475 Dynabelter Abrasive Belt Tool, Standard Duty
2 × $1,448.42 -
×
3M™ 17379, Versaflo™ Length Adjusting Breathing Tube BT-30, 7100009685, 1 EA/Case
1 × $80.58 -
×
Dynabrade 11376 Big Wheel, 4-3/8 Dia. x 1/4" W x 5/8 I.D., Urethane
1 × $287.76 -
×
3M 21543, Scotch-Brite Roloc Clean and Strip XT Pro Extra Cut Disc, TR, 2 in x NH, A XCS, 7100179815, 60/box
1 × $4.57 -
×
Dynabrade 55520 .3hp, Straight-Line Die Grinder, 25,000 RPM, Aluminum Housing, Rear Exhaust, 1/4" Collet
1 × $397.12 -
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,186.90 -
×
3M 29611, 641WY 1/4" X 24", 100 Mesh Diamond Cloth Belt, 7010534832
15 × $7.30 -
×
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
1 × $33.40 -
×
Dynabrade 61420 Raptor Vac Electric Portable Vacuum System
1 × $1,408.00 -
×
3M 22398, Roloc Disc 361F, 36 YF-weight, TR, 2 in, Die R200P, 7000000371
400 × $1.11 -
×
3M™ 07010, Supplied Air Respirator Hose W-9435-25/07010(AAD), 25 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005374, 1 EA/Case
1 × $175.93 -
×
3M 71358, 641WY 1/4" X 24", 600 Mesh Diamond Cloth Belt, 7010534894
1 × $9.18 -
×
3M™ 94275, Versaflo™ Gold Coated Tinted Over-Visor with UV/IR Protection M-967N, 70071696879, 1 EA/Case
1 × $192.76 -
×
3M 33349, 641WY 1/4" X 24", 220 Mesh Diamond Cloth Belt, 7010534919
30 × $9.52 -
×
Dynabrade 10690 Filter/Regulator/Lubricator, FRL40, 1/2" NPTAssy.
1 × $370.16 -
×
Dynabrade 95843 Dynabrade Air Lube 10W/NR, 1 Gallon
1 × $104.07 -
×
Dynabrade 11254 Contact Arm Ass'y, 4-3/4" Dia. x 1/2" W
1 × $508.22 -
×
Dynabrade 51301 .5 hp Straight-Line Die Grinder
1 × $431.21 -
×
3M 37001, Combination Dual Airline Back-Mounted Breathing Tube SA-2600/37001(AAD), 7000002044, 1 EA/Case
1 × $201.58
3M 43464, Molten Metal Neck Guard NC2-OR, Orange, 10 EA/Case, 7100296470
$432.00
Factory Stock, 7-10 Day Leadtime
3M Molten Metal Neck Guard NG2 GR is designed to protect against molten metal splash, radiant heat and flame hazards. It attaches to 3M and other hard hats using hook and loop fasteners on the inside of the shell. Internal attachments allow for use with or without earmuffs attached to the hard hat.
3M Molten Metal Neck Guard, NG2 GR, is designed to protect against molten metal splash, radiant heat and flame hazards. It attaches to 3M and other hard hats using hook and loop fasteners on the inside of the shell. The NC2 GR uses a streamlined design to provide protection against small splashes and spatter. Internal attachments allow for use with or without earmuffs attached to the hard hat.
