The 3M Particulate Cartridge 2076HF Hydrogen Fluoride, P95, with Nuisance Level Acid Gas Relief helps provide respiratory protection in environments containing hydrogen fluoride and certain oil and non-oil based particles. The cartridge/filter combination is effective for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces, or 50 times PEL with quantitatively fit tested full facepieces. The filter also offers nuisance level odor relief from acid gases that are below the PEL. Nuisance level refers to concentrations not exceeding OSHA PEL or other applicable government exposure limits, whichever is lower. Do not use for respiratory protection against acid gases in environments that are immediately dangerous to life or health (IDLH). Inventory needs and training requirements of safety equipment are reduced because this filter works for many different applications. This filter is commonly used in the following industries: aluminum processing, chemicals and oil and gas.
The cartridge/filter combination works with a wide range of facepieces, including 3M Half and Full Facepieces 6000, 7000 and FF-400 Series. If used with 3M Adapter 502, the filter may also be used with 3M Respirator 5000 Series or 3M Cartridge 6000 Series. If used with the 3M Scott AV-632 Bayonet Adapter, the filter may be used with the 3M Scott AV-3000 HT and AV-3000 SureSeal facepieces. The cartridge is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing hydrogen fluoride and certain oil and non-oil based particles. The filter has been assigned the color code ?Olive? in the NIOSH system. Passing NIOSH?s P-series test criteria, the 2076HF P95 filter provides at least 95 percent filter efficiency against particles.
Breathing hazardous particles or hydrogen fluoride gas can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M Particulate Cartridge 2076HF to help reduce exposure to certain particles and hydrogen fluoride.

Insize 7381-T25, MEASURING TIPS FOR SCREW THREAD MICROMETER, 24-18TPI, 6928640306853
Standard Abrasives 712026, PSA Surface Cleaning Disc, 5 in, 80, 7010368720
Dynabrade 78559 2-1/2" Dia. 2-Set, 8-32 Female Center Thread, 120 Grit, Dynacut A/O Overlap Slotted Disc, 100/pack
Dynabrade 92742 2" W x 150' L 9 Micron A/O Lapping Film DynaCut Roll
Standard Abrasives 880615, Buff and Blend GP Wheel, 4 in x 2 Ply x 1/4 in A MED, 7100095613
Dynabrade 90636 3" W x 7-3/8" L 320 Grit A/O DynaCut Belt, 10/pack
Standard Abrasives 852405, S/C Unitized Wheel, 524, 1 in x 1 in x 3/16 in, 7010330281
Dynabrade 25234 Vane Set (4pk)
3M™ 72010, Replacement Filter Kit 523-01-29, 7000056891, 1 EA/Case
Standard Abrasives 870710, Buff and Blend AP Disc, 6 in x 1/2 in A MED, 7000122061
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
Dynabrade 92745 2" W x 50' L 40 Micron Diamond Microfinishing Film DynaCut Roll
Standard Abrasives 873299, Quick Change TR S/C Unitized Wheel, 732, 2 in x 1/4 in, 7000122036 