The 3M Organic Vapor/Acid Gas Cartridge 6003 helps provide organic vapor and acid gas protection in a variety of environments. When properly used with an approved 3M respirator properly fitted, this respirator cartridge helps provide respiratory protection from certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, or hydrogen fluoride. The cartridge may be used for vapor concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepieces. Recommended applications for the cartridge include assembly and mechanical, batch-charging, change-overs, chemical dispensing, clean-up, cleaning, handling, painting, parts cleaning, pesticide application, powder, and seal coating. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. This cartridge is commonly used in the following industries: agriculture, aluminum reduction, chemical manufacturing, laboratories, petrochemical, pharmaceuticals, pulp and paper, and utilities.
This organic vapor and acid gas cartridge works with 3M Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet holders or 3M Scott AV-3000 HT and AV-3000 SureSeal facepieces with 3M Scott AV-632 Bayonet Adapter. The cartridge is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain organic vapors and acid gases. This cartridge is not for use in environments that are immediately dangerous to life or health (IDLH). The cartridge has been assigned the color code ?Yellow? in the NIOSH system.
Breathing organic vapors or acid gases can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M Organic Vapor/Acid Gas Cartridge 6003 to help reduce exposure to certain organic vapors and acid gases.

3M 29832, Sanding Screen, 150 Grit, 18 in x NH, 7100160831
3M 27551, EMI Copper Foil Shielding Tape 1181, 1/2 in x 18 yd (12.70 mm x 16.5m), 7000132182
3M 27468, EMI Copper Foil Shielding Tape 1181, 1 in x 18 yd (25,40 mm x 16,5 m), 7000132169
3M 26109, PPS Series 2.0 Adapter, Type S23, 1/4 Female, 18 Thread NPS, 7100135941
3M 29833, Sanding Screen, 120 Grit, 18 in x NH, 7100160843
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
Dynabrade 91430 1/2" W x 12" L 120 Grit A/O DynaCut Belt, 50/pack
3M 33349, 641WY 1/4" X 24", 220 Mesh Diamond Cloth Belt, 7010534919
Dynabrade 78690 D9 Cartridge Roll Mandrel 1/8" Pilot Dia. x 1" Pilot Length, 1/4" Shank Dia. x 1-1/4" Shank Length
Dynabrade 78686 D4 Cartridge Roll Mandrel 1/8" Pilot Dia. x 3/4" Pilot Length, 1/8" Shank Dia. x 1" Shank Length
3M™ 53797, Flexible Diamond Belt 6451J, 1/2" Dia x 18" L, M125 Micron, Type G, Pattern B2, 7010509272
3M 26139, PPS Series 2.0 Adapter, Type S43, 1/4 Male, 19 Thread BSP, 7100135337
3M™ 72122, Portable Compressed Air Filter and Regulator Panel 256-02-01, 100 cfm, 8 outlets, with Carbon Monoxide Monitor, 7000052147, 1 EA/Case
3M 26024, PPS Series 2.0 Spray Cup System Kit, Large (28 fl oz, 850mL), 200 Micron Filter, 7100134650
ACS Diamond Cloth Belt, CX1250 5/8" X 120" 125U
3M 16238, PPS Spray Gun Holder, 4 Gun, 7100158720 
