-
×
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
200 × $1.50 -
×
3M™ 07010, Supplied Air Respirator Hose W-9435-25/07010(AAD), 25 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005374, 1 EA/Case
1 × $175.93 -
×
Dynabrade 15420 Dynafile III Abrasive Belt Tool
1 × $963.87 -
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,186.90 -
×
ACS Diamond Cloth Belt, CX1250 3" X 90" 45U
2 × $171.30 -
×
Dynabrade 40320 Dynafile II Abrasive Belt Tool
1 × $688.35 -
×
3M 11414, Roloc Disc 361F, P120 XF-weight, TR, 1 in, Die R100N, 7000045104
500 × $0.58 -
×
Dynabrade 53533 Cone or Plug Grinder (Triple Extension)
1 × $1,493.91 -
×
3M 22395, Roloc Disc 361F, 60 YF-weight, TR, 3 in, Die R300V, 7000045098
400 × $1.33 -
×
Dynabrade 15336 Rubber Drive Wheel
1 × $71.38 -
×
Dynabrade 11395 Guide Wheel
1 × $37.26 -
×
3M 45714, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 3 in x NH, D/F 3HL, Die 300BE, 7100113113
1 × $0.86 -
×
3M™ 72122, Portable Compressed Air Filter and Regulator Panel 256-02-01, 100 cfm, 8 outlets, with Carbon Monoxide Monitor, 7000052147, 1 EA/Case
1 × $6,424.71 -
×
3M 11419, Roloc Disc 361F, P240 XF-weight, TR, 2 in, Die R200P, 7000045105
200 × $0.97 -
×
3M 09038, Garnet Sandpaper 9038NA, 9 in x 11 in, 4 Sheet Course Grit, 7000126231
10 × $2.31 -
×
3M 87449 Silver Depressed Center Grinding Wheel, T27 Quick Change, 9 in x 1/4 in x 5/8-11 Center Hub Thread, 7010409732, 20 per case
20 × $12.65 -
×
3M™ 72016, Remote Alarm & Strobe 529-05-20, Audible, 7000131708, 1 EA/Case
1 × $502.78
3M 37350, Versaflo Single Station Battery Charger Kit TR-641N/37350 (AAD), 7100035838, 1 EA/Case
$283.11
Factory Stock, 7-10 Day Leadtime, Priced Per Case
The TR-641N Battery Charger Kit is a complete single station battery charger for TR-600 Series PAPRs. It consists of a TR-640 Cradle and a TR-941 Power Supply.
The TR 641N Battery Charger Kit is a complete single station battery charger for TR 600 Series PAPRs. It consists of a TR 640 Cradle and a TR 941 Power Supply. The TR 641N battery charger will charge a TR 630 standard capacity battery or TR 632 high capacity battery in less than 4 hours. The TR 641N charger will charge one battery at a time. Batteries may be stored on the charger, fully charged, ready for immediate use.
