-
×
Dynabrade 56234 8" Dia. Non-Vacuum Disc Pad, Vinyl-Face
1 × $45.02 -
×
Dynabrade 62925 Vacuum Head w/Silencer Ass'y
1 × $2,648.93 -
×
Dynabrade 58505 3-1/4" W x 5" L Dynabug II Orbital Sander, Central Vacuum, .15 HP, 10,000 RPM, 3/32" Orbit
1 × $263.00 -
×
Dynabrade 53134 Anti-Vibration Handle
1 × $46.31 -
×
Dynabrade 79053 3" W x 24" L 120 Grit A/Z DynaCut Belt, 10/pack
10 × $7.63 -
×
Dynabrade 79154 1-1/2" W x 30" L 60 Grit Ceramic DynaCut Belt, 10/pack
10 × $13.85 -
×
Dynabrade 51346 3" (51 mm) Dia. Locking-Type Disc Pad, Medium Density, 1/4"-20 Thread
1 × $17.18 -
×
Dynabrade 53078 1/4" Straight-Line Drill, .4 HP, Rear Exhaust, 3,200 RPM
1 × $719.00 -
×
Dynabrade 96014 M4 x 0.7 x 8 Button Head Cap Screw
1 × $2.07
-
×
Dynabrade 50679 Open-End Wrench, 26 mm
1 × $8.33 -
×
Dynabrade 14056 Tension Roller
1 × $42.54
-
×
Dynabrade 31600 Dynascaler Surface Preparation Tool, Floor, 3", Rear Exhaust, 1,650 RPM
1 × $5,362.65 -
×
Dynabrade Nitro Series DS32 .3hp, 16,000 RPM, 2" Right Angle Disc Sander
1 × $151.00 -
×
Dynabrade 55226 Housing Cover, Sander
1 × $39.90 -
×
Dynabrade 92103 3" W x 10-11/16" L 120 Grit A/Z DynaCut Belt, 10/pack
10 × $4.16 -
×
Dynabrade 97679 Bearing
1 × $16.16 -
×
Dynabrade 64016 Contact Wheel Axle 1"
1 × $81.63
-
×
Dynabrade 11300 Contact Arm Ass'y, 1/4" Dia. x 3/8" W, Steel Wheel, Polish Turbine Blades
1 × $136.36 -
×
Dynabrade 90360 2" W x 34" L 36 Grit Z/A DynaCut Belt, 10/pack
10 × $11.13 -
×
Dynabrade 93662 5" Dia. x 3/4" Center Hole, 40/50 Grit Gulleted/Slotted Diamond Cut-Off Wheel
1 × $213.21 -
×
Dynabrade 11234 Contact Arm Ass'y, 1" Dia. x 3/8" W, Rubber Wheel, with no Platen
1 × $520.82 -
×
Dynabrade 11238 Contact Arm Ass'y, 1/4" Dia. x 3/8" W, Steel Wheel, Polish Turbine Blades
1 × $177.92 -
×
Dynabrade 96174 Motor Tune-Up Kit
1 × $171.75 -
×
Dynabrade 56089 Muffler Body
1 × $9.90
-
×
Dynabrade 64000 SuperFinisher, 115 Volts (AC), 1 Phase, 60 Hz
2 × $19,371.00
3M 17316, Versaflo Respiratory Hard Hat Assembly M-305, with Standard Visor and Faceseal, 7000002382, 1 EA/Case
$533.64
Factory Stock, 7-10 Day Leadtime, Priced Per Case
Used with an approved air source, M-300 Series hardhats provide respiratory (OSHA APF=25) and limited head (ANSI Z89.1-2003 Type 1 Class G) and eye (ANSI Z87.1-2010) protection. The M-305 assembly includes a standard visor and standard faceseal.
The M 305 assembly includes a M 925 Visor and M 935 Faceseal. The M 925 visor is made of polycarbonate. The M 935 faceseal is appropriate for general purpose use.
