-
×
Dynabrade 95600 Tune-Up Kit for .5 hp Motor
2 × $130.26 -
×
Norton 66261013403 - 3" X 1/2" Extra Coarse Grade Silicon Carbide Bear-Tex Rapid Strip TR Stripping Disc, 10 Each
10 × $8.36 -
×
Dynabrade 01788 Screw
2 × $1.93 -
×
Dynabrade 78538 3/4"Dia. 2-Set, 3-48 Female Center Thread, 80 Grit, Dynacut A/O Overlap Slotted Disc, 100/pack
100 × $1.10 -
×
Dynabrade 95263 Open-End Wrench, 17 mm
1 × $5.96 -
×
Dynabrade 56205 5" Dia. Non-Vacuum Disc Pad, Vinyl-Face
1 × $17.79 -
×
Dynabrade 13512 Dynastraight 6" (152 mm) Extension Finishing Tool, 1 HP, Rear Exhaust, 3,400 RPM, 1/2" (13 mm) Dia. Arbor
1 × $1,140.55 -
×
Dynabrade 21457 ND3071, Red Plastic Cover
1 × $20.29 -
×
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
250 × $4.14 -
×
Dynabrade 78165 1-1/4" Dia. x 80 Grit S/C Non-Vacuum PSA DynaCut Disc 25/pack
1 × $16.50 -
×
Dynabrade 13506 Dynastraight Finishing Tool, 1 HP, Rear Exhaust, 3,400 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $948.13 -
×
Dynabrade 52573 4" (102 mm) Dia. Straight-Line Cut-Off Wheel Tool, Rear Exhaust, 1 HP, 15,000 RPM, 3/8"-24 Spindle
1 × $603.51 -
×
Dynabrade 55404 Vanes, 4/Set, Vaned Pencil Grinder
1 × $36.49
-
×
Dynabrade 95821 Dynabrade Air Lube 10W/NR, 4oz Bottle
1 × $17.15 -
×
Dynabrade 11078 Contact Wheel Ass'y, 5/8" Dia. x 3/8" W x 3/8" I.D., Crown Face, 70 Duro Rubber
1 × $34.87 -
×
Dynabrade 50010 Collet, 3/8"-24 Female Thread, 1/4" Capacity, 3-Piece Collet
2 × $77.83 -
×
Dynabrade 90367 3/4" W x 34" L 60 Grit A/O DynaCut Belt, 50/pack
50 × $2.38 -
×
Dynabrade 64207 36" (91 cm) W x 72" (183 cm) L Downdraft Sanding Table, 230 V (AC)
1 × $5,965.11 -
×
Dynabrade 78006 1/2" W x 12" L Coarse Non-Woven DynaBrite Belts, 10/pack
10 × $4.69 -
×
Dynabrade 01794 Rubber Drive Wheel
1 × $279.95 -
×
Dynabrade 54912 Gear Set, 8500 RPM, 2.6Hp
1 × $393.73
-
×
Dynabrade 96425 Screws For Vacuum Shroud (57737)
1 × $1.93 -
×
Dynabrade 21432 ND220, Vane 5/Pack
1 × $21.89 -
×
Dynabrade 90874 2" Dia. Very Fine NWN DynaBrite Locking-Type Disc, 25/pack
25 × $1.89 -
×
3M 16312, PPS Lid & Liner Kit, Midi (13.5 fl oz), 125 Full Diameter
Micron Filter, 50 Lids & Liners per kit, 7100018936
1 × $125.53
3M 72678, Project Safety Kit with Valved Respirator, Project H1DC-PS, 7100161409
$9.16
Factory Stock, 7-10 Day Leadtime
We selected a few essential personal protective equipment items for an all-in-one approach to your next project.
The 3M Project Safety Kit is recommended for a woodworking or fiberglass insulation project, and includes an N95 3M Sanding/Fiberglass Respirator, 3M Chemical Splash/Impact Goggles and 3M Corded Reusable Earplugs. So, whether you use all three components at once, or each one individually, you can rely on the trusted protection of the 3M Project Safety Kit.
Related products
