- Superfinishing requires very clean coolant. If the coolant is not filtered, the grinding residue will act as an abrasive slurry, which can affect the final finish. Dynabrade?s Coolant Filtration System filters the coolant to 1?, eliminating this problem.
- 2-stage filters to prevent 1-micron filter from clogging prematurely. 40 gallon tank ? removable for cleaning. Unit on casters for easy portability.
- Compact construction. Transparent Tank for viewing coolant level. Easy access for changing filters. Self-priming Centrifugal Pump. GFCI protection.
Machine Specifications
Mfr. Model # 68000
| Frequency [Hz] | 60 |
|---|---|
| hp | 0.5 |
| Max. Air Flow [SCFM] | 1.5 |
| Voltage | 115 |
| CE Certified | No |
| EAC Certified | No |
| Height [inches] | 28.0 |
| Length [inches] | 36.0 |
| Weight [pounds] | 103.0 |
| Width [inches] | 28.0 |
| Phase | 1.0 |
| EAN (UPC) Code | 0616026680005 |
Parts
| Parts Page | 68000 |
|---|---|

3M 76750, Roloc Disc 777F, 60 YF-weight, TS, 2 in, Die RS200P, 7010299188
Dynabrade 54972 Vane Set (5pk)
Dynabrade 82559 1/4" W x 18" L 80 Grit Ceramic DynaCut Belt, 50/pack
Dynabrade 40378 Rubber Drive Wheel, Mini Dynafile II
Dynabrade 45203 Housing for Model 47200
Dynabrade 56321 6" Dia. Vacuum Disc Pad, Hook-Face, 52 Holes
Dynabrade 53639 Gear
Dynabrade 96100 Motor Tune-Up Kit
3M 02894, Scotch Printable Flatback Paper Tape 256, White, 3/4 in x 60 yd, 6.7 mil, 48/Case, 7000047439
Dynabrade 92245 - 4" (102 mm) Dia. x 3/4" (19 mm) W Bent Coarse Wire Wheel
Dynabrade 95216 Pin
Dynabrade 64674 Filter Cartridge
Dynabrade 78861 Crimped Wire Radial Wheel Brush 2" Dia. x .0118 x 7/16" Steel
Dynabrade 79149 1/2" W x 24" L 80 Grit Ceramic DynaCut Belts, 50/pack
Dynabrade 92100 3" W x 10-11/16" L 40 Grit A/Z DynaCut Belt, 10/pack
Dynabrade 57343 Speed Regulator
Dynabrade 01185 Vane Set (4pk)
Dynabrade 15336 Rubber Drive Wheel
Dynabrade 48371 .4 hp Straight-Line Die Grinder, Rear Exhaust, 25,000 RPM, 1/4" Collet
Dynabrade X3252V - 3" Mini Extreme & 5" Extreme Random Orbital Sander, Vac, Combo Kit 12,000 RPM, 3/32" Dia., Rear Exhaust
Dynabrade 78710 5/16" x 5/8"-B53 Dynacut A/O Mounted Point, 5/pack 
