-
×
Dynabrade 22091 2-3/4" x 8" Hand Sanding Block
1 × $56.70 -
×
Dynabrade 91430 1/2" W x 12" L 120 Grit A/O DynaCut Belt, 50/pack
50 × $1.29 -
×
3M™ 72122, Portable Compressed Air Filter and Regulator Panel 256-02-01, 100 cfm, 8 outlets, with Carbon Monoxide Monitor, 7000052147, 1 EA/Case
1 × $6,424.71 -
×
ACS CX1250 Diamond Belt, 1/2" X 24" 250u
12 × $8.20 -
×
3M 01708, Scotch-Brite SST Deburring Wheel, ST-WL, 8S Fine, 8 in x 2 in x 3 in, 7000144590
2 × $242.95 -
×
3M 26127, PPS Series 2.0 Adapter, Type S31, 1/8 Male, 28 Thread BSP, 7100135953
4 × $25.96 -
×
Dynabrade 14000 Dynafile Abrasive Belt Tool
1 × $734.00 -
×
Dynabrade 60052 .1 hp Straight-Line Quick-Change Pencil Grinder, Rear Exhaust, 35,000 RPM, 3/32" Collet
1 × $1,025.00 -
×
3M 19677, Scotch-Seal Industrial Sealant 800, Reddish Brown, 1 Gallon Drum, 7000000793, 4/Case
4 × $251.59 -
×
Dynabrade 11475 Dynabelter Abrasive Belt Tool, Standard Duty
1 × $1,520.00 -
×
3M 01333, PSA Cloth Disc 348D, 60 X-weight, 3 in x NH, Die 300V, 7000118880
200 × $0.94 -
×
Dynabrade 51811 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 1000,000 RPM, 1/16" Collet
1 × $751.00 -
×
3M 01328, PSA Cloth Disc 348D, P180 X-weight, 3 in x NH, Die 300V, 7000045068
200 × $0.95
Air Turbine Tools 206XSV – 6mm Straight Hand Tool Series with Brake, 40,000 RPM, 42997
$750.00
Light and Quiet with ultra-low vibration magnitude at 1.43 m/s2 r.m.s. Now you can replace your heavy noisy vibrating tools requiring lubrication and maintenance. At 0.4 hp (0.30 kW) our patented double turbine 206XSV with slide valve for quick shut-off punches way above its weight of 8.2 oz (0.23 kg). Work with governed high speed which stays near rated speed under load at constant 50,000 rpm. You will get superb surface quality and virtually no stress or noise.
In your wrist or fingers it’s so light and comfortable. The 1/4″ (6mm) heavy-duty 206XSV is a powerful tool with ultra low vibration and low noise. No maintenance and no added lubrication ever. The constant high speed – within 5% of free speed at maximum power – gives you greater accuracy. No vanes to vibrate or repair.
The 206XSV has a low friction free motor with fewer moving parts. No maintenance is a big difference from vane tool technology, with a faster finer finish. At 30,000 rpm you have superb control. At 50,000 rpm you get plenty of power to match and beat other tools. The 206XSV is equipped with a shut-off valve located on its hose.
Related products
Aerospace Tools
Dynabrade 51700 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8″ Collet
$558.00
Pencil Grinders
Dynabrade 51811 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 1000,000 RPM, 1/16″ Collet
$751.00
Pencil Grinders
Dynabrade 51702 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 60,000 RPM, 3/32″ Collet
$558.00