-
×
Dynabrade 11477 Dynabelter Abrasive Belt Tool, Heavy-Duty
1 × $2,712.00 -
×
Dynabrade 53533 Cone or Plug Grinder (Triple Extension)
1 × $1,569.00 -
×
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
400 × $1.74 -
×
ACS CX1250 Diamond Belt, 1/2" X 24" 9u
12 × $7.60 -
×
Dynabrade 40320 Dynafile II Abrasive Belt Tool
1 × $722.00 -
×
3M 28443, Disc Pad Face Plate Ribbed 28443, 4-1/2 in Extra Hard Red, 7000045279
10 × $17.76 -
×
3M 22408, Roloc Disc 361F, P100 YF-weight, TR, 1-1/2 in, Die R150S, 7000045101
500 × $0.67 -
×
3M 15041, Scotch Electrical Shielding Tape 24, 1 in x 15 ft (25 mm x 4,6 m), 7000031348
10 × $38.32 -
×
3M 11137, Roloc Disc 361F, 50 YF-weight, TR, 1-1/2 in, Die R150S, 7000045094
500 × $0.73 -
×
Dynabrade 52747 Shroud, 7", Vacuum, for 1.3 hp
1 × $331.02 -
×
Norton 66623325035 - 2" 120 Grit Fine Grade Aluminum Oxide Vortex Rapid Prep Green TR Non-Woven Surface Preparation Disc, 50 Each
50 × $1.70 -
×
Standard Abrasives 840038, Quick Change Surface Conditioning GP Disc, A/O Medium, TSM, Maroon, 3/4 in, QS75KM, 7000121647, 50/case
50 × $0.84 -
×
3M 28830, 675L, 1/2" X 72", 74u, Diamond Microfinishing Film Belt 7010508919
6 × $29.15 -
×
Dynabrade 51622 .1 hp Straight-Line Pencil Grinder, Central Vacuum, 35,000 RPM, 3mm Collet
1 × $603.00
Air Turbine Tools 206XSV – 1/4″ Straight Hand Tool Series with Brake, 50,000 RPM, 42992
$750.00
Light and Quiet with ultra-low vibration magnitude at 1.43 m/s2 r.m.s. Now you can replace your heavy noisy vibrating tools requiring lubrication and maintenance. At 0.4 hp (0.30 kW) our patented double turbine 206XSV with slide valve for quick shut-off punches way above its weight of 8.2 oz (0.23 kg). Work with governed high speed which stays near rated speed under load at constant 50,000 rpm. You will get superb surface quality and virtually no stress or noise.
In your wrist or fingers it’s so light and comfortable. The 1/4″ (6mm) heavy-duty 206XSV is a powerful tool with ultra low vibration and low noise. No maintenance and no added lubrication ever. The constant high speed – within 5% of free speed at maximum power – gives you greater accuracy. No vanes to vibrate or repair.
The 206XSV has a low friction free motor with fewer moving parts. No maintenance is a big difference from vane tool technology, with a faster finer finish. At 30,000 rpm you have superb control. At 50,000 rpm you get plenty of power to match and beat other tools. The 206XSV is equipped with a shut-off valve located on its hose.
Related products
Aerospace Tools
Dynabrade 51700 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8″ Collet
$558.00
Pencil Grinders
Dynabrade 51705 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 50,000 RPM, 3/32″ Collet
$558.00
Robotic Power Tools
$512.00