-
×
Dynabrade 96045 Motor Tune-Up Kit
1 × $171.75 -
×
Dynabrade 96241 Bearing Press Tool
1 × $65.04 -
×
Dynabrade 92201 1-1/2" W x 30" L 60 Grit A/Z DynaCut Belt, 50/pack
50 × $5.80 -
×
Dynabrade 56354 2-2/3" x 6-7/8" Non-Vacuum Dynabug II Disc Pad, Vinyl-Face
1 × $33.57 -
×
Dynabrade 50014 3/8" (.375) Capacity Collet Sleeve
1 × $35.13 -
×
Dynabrade 95541 Grease Gun
1 × $33.57 -
×
Dynabrade 56106 5" Dia. Non-Vacuum Disc Pad, Vinyl-Face
1 × $24.59 -
×
Dynabrade 59020 5" Dia. Non-Vacuum Dynorbital-Spirit Random Orbital Sander, 3/16" Orbit
1 × $213.00 -
×
Dynabrade 15336 Rubber Drive Wheel
1 × $76.45 -
×
Dynabrade 53533 Cone or Plug Grinder (Triple Extension)
1 × $1,569.00
Dynabrade 13402 Dynisher Finishing Tool, Rear Exhaust, 3,400 RPM, 5/8-11″ Spindle Thread
$1,261.00
.7 hp, 7 Degree Offset, 3,400 RPM, 5/8″-11 Thread, Extended Shroud
| Arbor Hole | 3/4″ (19 mm) |
|---|---|
| hp | 0.7 |
| Max. RPM | 3,400 |
| Tool Spindle Thread | 5/8″ – 11 Thread |
| Air Inlet Thread | 1/4″ NPT |
| Exhaust Type | Rear |
| CE Certified | Yes |
| EAC Certified | Yes |
| Hose I.D. [inches] | 3/8″ |
| Vacuum Type | Non-Vacuum |
| EAN (UPC) Code | 0616026134027 |
| Tool Style | 7 Degree Offset |
Tool Specifications
Mfr. Model # 13402
| Arbor Hole | 3/4″ (19 mm) |
|---|---|
| hp | 0.7 |
| Max. RPM | 3,400 |
| Tool Spindle Thread | 5/8″ – 11 Thread |
| Air Inlet Thread | 1/4″ NPT |
| Exhaust Type | Rear |
| CE Certified | Yes |
| EAC Certified | Yes |
| Hose I.D. [inches] | 3/8″ |
| Vacuum Type | Non-Vacuum |
| EAN (UPC) Code | 0616026134027 |
| Tool Style | 7 Degree Offset |
Disassembly/ Assembly Instructions
| Disassembly/ Assembly Instructions |  |
|---|
Air Tool Maintenance Guide
| Tool Maintenance Guide | |
|---|
Related products
