-
×
Dynabrade 50947 - 8" (203 mm) Dia. Non-Vacuum Wet/Dry Sander Disc Pad, Hook-Face, Short Nap
1 × $42.98 -
×
Dynabrade 96139 Retaining Ring
1 × $2.07 -
×
Dynabrade 92929 - 5" (127 mm) Dia. x 1-1/2" (38 mm) W Heavy Duty DynaWheel Pneumatic Wheel
1 × $80.44
-
×
Dynabrade 53435 Drill, .4 HP, Rear Exhaust, 3,200 RPM, 1/4"-28 Female Thread
1 × $1,020.00 -
×
Dynabrade 53531 Cone or Plug Grinder (Single Extension), 18,000 RPM, 3/8"-24 Male Thread Spindle
1 × $1,087.00 -
×
Dynabrade 15026 Contact Arm Ass'y, 5/8" Dia. x 3/8" W, Rubber Wheel, with 1/2" W Platen
1 × $75.38 -
×
Dynabrade 02679 Shield
1 × $5.49 -
×
Dynabrade 15310 Guard
1 × $38.19 -
×
Dynabrade 11080 Contact Wheel Ass'y, 1" Dia. x 3/8" W x 3/8" I.D., Round Radiused Face, 70 Duro Rubber
1 × $36.49 -
×
Dynabrade 80081 Handle Ass'y
1 × $10.50
-
×
Dynabrade 13443 Spacer
1 × $48.62
-
×
Dynabrade 57804 3-2/3" W x 7" L Dynabug Orbital Sander, Central Vac-Ready, .24 HP, 8,000 RPM, 3/16" Orbit
1 × $577.00 -
×
Dynabrade 91629 1-1/2" W x 24" L 320 Grit A/O DynaCut Belt, 10/pack
10 × $6.07 -
×
Dynabrade 02649 Bearing
1 × $16.99 -
×
Dynabrade 11135 - 1/2" (13 mm) x 2" (51 mm) Hard Platen Pad
1 × $4.95
-
×
Dynabrade 59464 Dynorbital-Spirit Drop-In Motors (10 Pack) with Repair Tools Included
1 × $1,236.63 -
×
Dynabrade 01024 O-Ring
2 × $2.07 -
×
Dynabrade 78710 5/16" x 5/8"-B53 Dynacut A/O Mounted Point, 5/pack
5 × $1.57
Dynabrade 62845 Raptor Vac Dust Extraction Arm, w/ 13″ x 19″ Hood
$2,508.54
Raptor Vac® Dust Extraction Arm, with 13″ x 19″ Hood
Dynabrade 62845 Raptor Vac® Dust Extraction Arms For ATEX Approved Extraction of Combustible Dust Raptor Vac® Dust Extraction Arms are used with Division 1 Vacuums and are specially designed for workplaces generating large amounts of dust/fumes. These easy-to-use Arms afford the operator the ultimate in mobility and flexibility, along with high-suction capability in even the toughest areas!
For use with vacuum models:
61461, 61462, 61463, 61464
Accessory Specifications
Mfr. Part # 62845
Dynabrade 62845 Raptor Vac® Dust Extraction Arms For ATEX Approved Extraction of Combustible Dust Raptor Vac® Dust Extraction Arms are used with Division 1 Vacuums and are specially designed for workplaces generating large amounts of dust/fumes. These easy-to-use Arms afford the operator the ultimate in mobility and flexibility, along with high-suction capability in even the toughest areas!
For use with vacuum models:
61461, 61462, 61463, 61464
Related products
