-
×
Dynabrade 18410 Safety Lever Spring
1 × $2.22 -
×
Dynabrade 78710 5/16" x 5/8"-B53 Dynacut A/O Mounted Point, 5/pack
5 × $1.57 -
×
Dynabrade 51307 .5 hp Straight-Line Die Grinder, Rear Exhaust, 24,000 RPM, 1/4" Collet
1 × $477.00 -
×
Dynabrade 82495 6" Dia. x 400 Grit A/O Vacuum PSA Filmbac DynaCut Disc, 100/Pack
100 × $1.47 -
×
Dynabrade 93534 3" Mandrel for Sanding Stars, 3-48 Male Thread
2 × $9.90 -
×
Dynabrade 96014 M4 x 0.7 x 8 Button Head Cap Screw
1 × $2.07
-
×
Dynabrade 50010 Collet, 3/8"-24 Female Thread, 1/4" Capacity, 3-Piece Collet
1 × $83.35 -
×
Dynabrade 39200 2" Type C, Roto Peen Flaps
1 × $70.53 -
×
Dynabrade 96425 Screws For Vacuum Shroud (57737)
1 × $2.07 -
×
Dynabrade 92102 3" W x 10-11/16" L 80 Grit A/Z DynaCut Belt, 10/pack
40 × $4.16 -
×
Dynabrade 78739 5/16" x 5/8"- B53 DynaFire A/O Vitrified Mounted Point, 5/pack
30 × $2.36
-
×
Dynabrade 95990 Wet Tank Assembly
1 × $137.01 -
×
Dynabrade 64490 33" (84 cm) W x 60" (152 cm) L Downdraft Sanding Table, 220 V (AC)
1 × $4,192.35 -
×
Dynabrade 45221 Sleeve for 48360, 20,000 RPM
1 × $43.44
-
×
Dynabrade 52211 .5 hp 7 Degree Offset Die Grinder, Front Exhaust, Short Shank, 30,000 RPM, 1/4" Collet
1 × $533.00 -
×
Dynabrade 78694 D22 Cartridge Roll Mandrel 1/4" Pilot Dia. x 1-1/2" Pilot Length, 1/4" Dia. Shank x 1-1/4" Shank Length
1 × $5.21 -
×
Dynabrade 78709 3/8" x 3/4"-B52 Dynacut A/O Mounted Point, Vitrified, 5/pack
10 × $1.57 -
×
Dynabrade 59380 Rotor/Vane Set
1 × $71.27 -
×
Dynabrade 53270 7" (180 mm) Dia. Right-Angle Disc Sander
1 × $1,585.00 -
×
Dynabrade 11517 Idler Arm
1 × $105.91 -
×
Dynabrade 79881 5" Dynacut 100 Grit Extreme Orange Scalloped Edge, 50 per box
1 × $47.38 -
×
Dynabrade 07181 Spindle Assembly
1 × $148.60
-
×
Dynabrade 13505 Dynastraight Finishing Tool, 1 HP, Rear Exhaust, 3,400 RPM, 5/8"-11 Arbor
1 × $996.00 -
×
Dynabrade 78724 3/8" x 3/4"-B52 Dynacut A/O Mounted Point, Vitrified, 5/pack
10 × $1.57
-
×
Dynabrade 54021 1/4"-28 Male 1/4"-20 Male, 1-3/16" Length
1 × $35.13 -
×
Dynabrade 01480 Vane Set (4pk)
1 × $26.09 -
×
Dynabrade 79004 1/8" W x 12" L 80 Grit A/Z DynaCut Belt, 50/pack
50 × $1.24 -
×
Dynabrade 11078 Contact Wheel Ass'y, 5/8" Dia. x 3/8" W x 3/8" I.D., Crown Face, 70 Duro Rubber
2 × $36.60 -
×
Dynabrade 54705 Rotor/Vane Set
1 × $118.01 -
×
Dynabrade 18564 Spindle, 5/8"-11
1 × $49.76
-
×
Dynabrade 95848 Dynabrade Gear Oil
1 × $12.98
Dynabrade 62843 Dust Extraction Arm with 8″ Round Hood, Elbow Connection
$1,948.96
8″ Round Hood, Elbow Connection
Dynabrade 62843 Raptor Vac® Dust Extraction Arms For ATEX Approved Extraction of Combustible Dust Raptor Vac® Dust Extraction Arms are used with Division 1 Vacuums and are specially designed for workplaces generating large amounts of dust/fumes. These easy-to-use Arms afford the operator the ultimate in mobility and flexibility, along with high-suction capability in even the toughest areas!
For use with vacuum models:
61461, 61462, 61463, 61464
Accessory Specifications
Mfr. Part # 62843
Dynabrade 62843 Raptor Vac® Dust Extraction Arms For ATEX Approved Extraction of Combustible Dust Raptor Vac® Dust Extraction Arms are used with Division 1 Vacuums and are specially designed for workplaces generating large amounts of dust/fumes. These easy-to-use Arms afford the operator the ultimate in mobility and flexibility, along with high-suction capability in even the toughest areas!
For use with vacuum models:
61461, 61462, 61463, 61464
Related products
Dynabelter Contact Arms
Dynabrade 11684 Dynabelter Contact Arm Assembly 4″ DIA X 5/8″ W., 40 Duro Serrated
$438.51
