-
×
Dynabrade 51811 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 1000,000 RPM, 1/16" Collet
1 × $751.00 -
×
Dynabrade 51304 .5 hp Straight-Line Die Grinder, Rear Exhaust, 15,000 RPM, 1/4" Collet
1 × $477.00 -
×
Dynabrade 53531 Cone or Plug Grinder (Single Extension), 18,000 RPM, 3/8"-24 Male Thread Spindle
1 × $1,087.00 -
×
Dynabrade 53807 .5 hp Straight-Line Die Grinder, Steel Housing, Front Exhaust, 24,000 RPM, 1/4" Collet
2 × $477.00 -
×
Dynabrade 54907 Bearing- 19 x 7 x 6
2 × $23.44 -
×
Dynabrade 52439 3" (76 mm) Dia. Right Angle Diamond Cut-Off Wheel Tool
1 × $754.00 -
×
Dynabrade 64217 Weatherproof cover with receptacle and lever switch
2 × $116.73
-
×
Dynabrade 52436 4-1/2" (114 mm) Dia. 7 Degree Offset Vacuum Cut-Off Wheel Tool
2 × $767.00 -
×
Dynabrade 56469 Exhaust Gasket
1 × $7.28 -
×
Dynabrade 52256 .7 hp Straight-Line Die Grinder, Front Exhaust, 15,000 RPM, 1/4" Collet
1 × $536.00 -
×
Dynabrade 48370 .4 hp Straight-Line Die Grinder, Rear Exhaust, 25,000 RPM, 1/8" Collet
1 × $437.00 -
×
Dynabrade 91245 8" Dia. x 180 Grit A/O Vacuum PSA DynaCut Disc, 25/Box
1 × $55.75 -
×
Dynabrade 52200 .4 hp Straight-Line Die Grinder, Front Exhaust, 25,000 RPM, 1/4" Collet
1 × $395.00 -
×
Standard Abrasives 710335, A/O Straight Cartridge Roll, 1/4 in x 1 in x 1/8 in 60, 7100080015
100 × $0.33 -
×
Dynabrade 58511 68 mm x 175 mm Dynabug II Orbital Sander, Non-Vacuum, .15 hp, 10,000 RPM, 3/32" Orbit
1 × $250.00 -
×
Dynabrade 51810 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 1000,000 RPM, 1/8" Collet
1 × $751.00 -
×
3M 16066, PPS Mix Ratio Inserts, Mini (6 fl oz), 7000120511
50 × $25.86
Binks 98-3161, SV100 Siphon Fed Conventional Spray Gun
This item has been Discontinued. Please see Binks suggested replacement item 905173.
The Spray Vantage Pro Spray Gun Series is a great option for those on a budget. Siphon fed spray Guns provide a superior finish quality with thinner material, thicker material will not spray as well with a Siphon Fed Spray Gun.
Siphon feed, air pressure recommended is 10-15 CFM/30-45 PSI, includes 1.8 tip
Specs:
-Name: SV100 Siphon Feed
-Part Number: 98-3161
-Gun Category: Spray Vantage Pro Series
-Gun Type: Manual
-Fluid Passages: Aluminum
-Fluid Inlets: 3/8″ NPS(M)
-Air Inlet: 1/4″ NPS(M)
-Weight: 1.17 lbs (532 g)
-Construction: Cast Aluminum
-Market: Painter-Decorator-Contractor
-Colors: Silver-HVLP technology available in pressure feed and gravity feed versions
-Air inlet control (feathering) valve included
-Adjustable spray pattern
-Stainless Steel needle and fluid nozzle
-Stainless Steel fluid passages in pressure and siphon versions
Related products
$38.43
Overspray Protectors
3M 30137, Heavy Duty Canvas Wheel Masker, 20 inch, 7100145359, 4 per pack
$129.38