-
×
3M 16065, PPS Mix Ratio Inserts, Standard (22 fl oz), 7000120485
100 × $53.72 -
×
Insize 2307-1R, REVERSE READING DIAL INDICATOR, 1", lug back, 6928640396649
4 × $44.71 -
×
Dynabrade 53533 Cone or Plug Grinder (Triple Extension)
1 × $1,569.00 -
×
Insize 4710-300, CYLINDER SQUARE, length 12", 6928640316319
1 × $2,982.41
-
×
3M 50730, PPS UV Standard Lid & Liner Kit, Standard (22 fl oz, 650
mL), 125 Micron Filters, 7100067511
1 × $161.35 -
×
Dynabrade 96248 Repair Collar-1-3/8" Bore
1 × $44.69 -
×
Insize 3232-5, BLADE MICROMETER, 4-5", 6928640327636
2 × $330.99
-
×
Insize 6300, MICROMETER STAND, 6928640307294
1 × $51.04
-
×
3M 16001, PPS Cup & Collar, Standard, 7100003286, 2 Per Carton
4 × $44.34 -
×
Dynabrade 96243 Bearing Press Tool
1 × $59.99 -
×
3M 28135, Hookit Clean Sanding Disc 900DZ, 6 in P100 J-weight, Die 500LG, 7010300153
250 × $1.97 -
×
Dynabrade 13160 Grip-Housing, Red
1 × $22.35
-
×
Insize 1188-300AWL, DIGITAL BLADE CALIPER, 0-12"/0-300mm, built-in wireless, 6940561942620
1 × $384.72
-
×
3M 07054, Scotch Printable Flatback Paper Tape 256, White, 1 in x 60 yd, 6.7 mil,36 per case (12 rolls/pack 3 packs/case), 7010378934
36 × $41.98 -
×
Insize 0210-G260, INFRARED THERMOMETER (BASIC TYPE), -22 ?F~500?F/-30?C~260?C, 6974029773310
1 × $66.86
-
×
Insize 3232-75A, BLADE MICROMETER (6.5x0.75mm), 50-75mm, graduation 0.01mm, 6928640305306
1 × $277.27
-
×
Insize 4120-20, METRIC THREAD RING GAGE, GO, M20x2.5, 6928640341519
1 × $71.83
-
×
3M 16199, PPS Disposable Lids, Standard and Large, 125 Micron Full
Diameter Filter, 25 lids per case, 7000119821
1 × $43.32 -
×
3M 06802, Hand-Masker Film Blade FB12, 12 in, (30.4 cm), 7100091214
6 × $18.36 -
×
Dynabrade 77761 4-1/2" Dia. x 7/8" Center Hole, 36 Grit, Type 27, Ceramic DynaCut Flap Disc, 10/pack
10 × $95.70 -
×
3M 29823, Sanding Screen, 100 Grit, 20 in x NH, 7100160246
12 × $9.25
Insize ISHW-L20, WEBSTER HARDNESS TESTER, 6928640325427
$3,174.36
Application for aluminum alloy general use. Hardness range 0 ~ 20HW. Min. reading 1HW.
Accuracy ?0.5HW (at 5 ~ 17HW).
To measure the hardness of soft metal such as aluminum alloy, copper, brass, soft steel, etc.
According to ASTM B647-84 (2000).
Related products
Measuring/ Inspection Instruments
Insize 0120-IM24, INDUCTIVE MOISTURE METER, 0~100%, 6974029776588
$207.68
Measuring/ Inspection Instruments
$3,744.91
Measuring/ Inspection Instruments
Insize 4809, U.S. STAND SHEET METAL GAGE, 0-36(.3125~.0070″), 6928640330162
$35.18