-
×
3M 70147, Hookit Center Water Feed Disc Hand Pad, 3 in x 7/8 in, 7000045752
10 × $26.22 -
×
Standard Abrasives 42658, A/O Flap Wheel 625105, 3 in x 1/2 in x 1/4-20 in 60, 7010369119, 10 per case
10 × $9.31 -
×
Insize 1185-300A, DIGITAL OUTSIDE POINT CALIPER, 0-12"/0-300mm, 6940561959918
1 × $600.00 -
×
3M 77792, Textured Surface Applicator TSA-2, For Mortar Joints And inside Corners, 1 Ea/Case, 7000005252
1 × $230.09
-
×
3M 33443, Cubitron II File Belt, 36+, 1/2 in x 18 in (12.7 mm x 457.2 mm), 7100033184, 10 belts per carton, 5 cartons per case
100 × $38.92 -
×
Insize 6140, DEPTH BASE ATTACHMENT, suitable for calipers with beam width (w) .630", 6928640303579
1 × $24.84
-
×
3M™ 72010, Replacement Filter Kit 523-01-29, 7000056891, 1 EA/Case
1 × $553.91 -
×
3M 29611, 641WY 1/4" X 24", 100 Mesh Diamond Cloth Belt, 7010534832
15 × $7.30 -
×
Insize 4807, ANGLE GAGE SET, 6928640319341
1 × $67.89
-
×
Insize 6300, MICROMETER STAND, 6928640307294
1 × $51.95
-
×
Dynabrade 79325 4-1/2" Dia. x 7/8" Center Hole, 36 Grit, Ceramic DynaCut Fiber Disc, 25/box
25 × $75.66 -
×
3M 03126, General Purpose Sanding Sponge CP040-6P, Single Angle, 2-7/8 in x 4-7/8 in x 1 in, Fine, 7100101532, 6/pack
4 × $17.74 -
×
3M 01875, Charge-Collection Solar Tape 3011, 2 mm x 1200 m, 7010312686
9 × $602.05 -
×
Insize 2197, LARGE RANGE DIGITAL RADIUS GAGE, R1(4-590"/100-1500mm), R2(4-590"/100-1500mm), 697409778087
1 × $4,218.75
-
×
Insize 1136-601, ELECTRONIC CALIPER (jaw length 100mm), 0-600mm/0-24", 6928640301599
1 × $630.83
-
×
Standard Abrasives 726004, A/O C4 Straight Precision Cartridge Roll, 1 in x 2-1/2 in x 1/4 in 80, 7100098780
25 × $8.64 -
×
3M 26120, PPS Series 2.0 Adapter, Type S28, 17.5 mm Female, 19 TPI
Thread, 7100135956
1 × $27.52 -
×
3M 71358, 641WY 1/4" X 24", 600 Mesh Diamond Cloth Belt, 7010534894
1 × $10.47 -
×
3M 59550, Premium 4-Point Chin Strap with Magnetic Buckle and Selector for SecureFit Safety Helmet X5000 Series X5-P4PTCS2, 10 EA/Case, 7100175589
1 × $111.35
Insize 6801-1202, MAGNETIC V-BLOCK, 3.9×2.8×3.7″, 6928640320637
$243.75
Hold cylindrical workpieces for inspection and machining.
Supplied in single piece.
Not hardened.
V groove on the top for large shafts.
V groove on the bottom for small shafts.
Not suitable for steel or iron surface.
Related products
Measuring/ Inspection Instruments
Insize 3231-2, NON MAGNETIC MICROMETERS, 1-2″, 6928640360480
$1,237.50
Measuring/ Inspection Instruments
Insize 3231-3, NON MAGNETIC MICROMETERS, 2-3″, 6928640360497
$1,352.34