-
×
Insize 0131-A120, LIGHT METER, 0.01~19.99FC, 0.1~199.9FC, 1~1999FC, 10~19990FC, 0.1~199.9Lux, 1~1999Lux, 10~19990Lux, 100~199900Lux, 6974029776557
1 × $110.63 -
×
3M 97957, Hi-Strength Spray Adhesive 90 CA, Low VOC <25%, Clear, 24 fl oz Can (Net Wt 19.0 oz), 7000121418, 12/Case
12 × $21.93 -
×
3M 26022, PPS Series 2.0 Adapter, Type S12, 10 mm Male, 1.0 mm Thread, 7100135943
1 × $25.96 -
×
3M 15041, Scotch Electrical Shielding Tape 24, 1 in x 15 ft (25 mm x 4,6 m), 7000031348
10 × $38.32 -
×
3M 26116, PPS Series 2.0 Adapter, Type S25, 1/4 Female, 19 Thread BSP, 7100135957
1 × $25.96 -
×
3M 27551, EMI Copper Foil Shielding Tape 1181, 1/2 in x 18 yd (12.70 mm x 16.5m), 7000132182
18 × $39.89 -
×
Insize 6143, DEPTH STOP FOR CALIPERS, 6928640371301
1 × $18.63
-
×
3M 26130, PPS Series 2.0 Adapter, Type S35, 16 mm Female, 1.5 mm
Thread Stretched, 7100135926
1 × $25.96 -
×
Standard Abrasives 42699, A/O Flexible Flap Wheel 621426, 1 in x 1 in x 1/4-20 in 80, 7010369136, 10 per case
10 × $6.83 -
×
3M 27468, EMI Copper Foil Shielding Tape 1181, 1 in x 18 yd (25,40 mm x 16,5 m), 7000132169
9 × $79.81 -
×
Insize 0110-1125, ANEMOMETER, 6974029776595
1 × $178.56
-
×
3M 34556, Cubitron II Net Sheet Roll, 320+, 80 mm x 10 m, 7100283765, 6 Rolls/Case
6 × $28.94 -
×
Insize 6318, CALIPER/MICROMETER GRINDING MACHINE (caliper grinding blocks are included), 6940561953862
1 × $3,744.91
-
×
3M 07054, General Purpose Sanding Sponge CP-041-ESF, Single Angle, 2-7/8 in x 4-7/8 in x 1 in, Medium, 7100101551
24 × $3.21
Insize 4002-A9, ANGLE GAGE BLOCK, 9?, 6928640354182
$414.18
Accuracy: ?2″.
To inspect protractor, taper gage, index plate, index head and goniometer, can also be used to set angle.
Made of special alloy steel, hardness HRC64, high stability, wear resistance and easy combination.
Can be combined to any angle with interval 6 seconds after combination (6″, 12″, 18″, … , 360?).
