-
×
Dynabrade 53435 Drill, .4 HP, Rear Exhaust, 3,200 RPM, 1/4"-28 Female Thread
1 × $1,020.00 -
×
Dynabrade 25234 Vane Set (4pk)
1 × $28.26 -
×
Dynabrade 82495 6" Dia. x 400 Grit A/O Vacuum PSA Filmbac DynaCut Disc, 100/Pack
100 × $1.47 -
×
Dynabrade 93166 4" Dia. X 1/4" Dia. Shank, 80 Grit, A/O, Spindle-Mount Sanding Star
1 × $36.38 -
×
Dynabrade 78709 3/8" x 3/4"-B52 Dynacut A/O Mounted Point, Vitrified, 5/pack
5 × $1.57 -
×
Dynabrade 96425 Screws For Vacuum Shroud (57737)
1 × $2.07 -
×
Dynabrade 78739 5/16" x 5/8"- B53 DynaFire A/O Vitrified Mounted Point, 5/pack
5 × $2.36 -
×
Dynabrade 01243 Housing
1 × $128.46 -
×
Dynabrade 01604 Air Control Ring
1 × $20.44 -
×
Dynabrade 79824 3" P2500 Grit Dynasoft Finishing Film Non Vac Hook Face Disc, 50 per box
1 × $62.63 -
×
Dynabrade 52412 3" Dia. 7 Degree Offset Disc Sander, Front Exhaust, .7 HP, 20,000 RPM, 3/8"-24 Thread
1 × $575.00 -
×
Dynabrade 59043 6" Dia. Self-Generated Vacuum Dynorbital-Spirit Random Orbital Sander, 3/32" Orbit
1 × $226.00 -
×
Dynabrade 18426 Vane Set (4pk)
1 × $20.20 -
×
Dynabrade 92918 - 2" (51 mm) Dia. x 2" (51 mm) W Slotted Wheel
1 × $110.80
-
×
Dynabrade 89242 3-1/2" W x 15-1/2" L Medium NWN DynaBrite Premium Belt
10 × $43.99 -
×
3M 53635, Scotch High Tack Box Sealing Tape 311+, Clear, 72 mm x 100 m, 24 Rolls/Case, 7100253843
24 × $5.77
-
×
Dynabrade 15336 Rubber Drive Wheel
1 × $76.45 -
×
Dynabrade 94799 2" W x 72" L 180 Grit A/O DynaCut Belt, 10/pack
10 × $7.18 -
×
Dynabrade 57407 2-3/4" W x 8" L Dynaline Sander, Non-Vacuum with Clips
1 × $860.00 -
×
Dynabrade 78805 4" Dia. x .020 x 5/8"-11 UNC Standard Twist Wire Wheel, Steel
1 × $27.37 -
×
Dynabrade 92118 1/4" W x 12" L 180 Grit A/O DynaCut Belt, 50/pack
50 × $1.15 -
×
Dynabrade 57833 - 3-2/3 x 7" Shaft Balancer, 3/16" Orbit
1 × $266.91
-
×
3M 13627, 947, Hookit Disc Pad Holder, 7 in x 1 in x 5/8 in 5/8-11 Internal, 7000028353
1 × $47.79
Insize 3227-E028, TWO POINTS INTERNAL MICROMETER, .24-.28/6-7mm, 6940561954449
$508.62
Graduation .0001″
Rachet stop.
Optional accessory: setting rings (part no. 6313), micrometer stand and clamp (part no. 6301 and 6301-2).
