-
×
Insize 7342-M1, PIN GAGE HANDLE (OPERATED WITHOUT WRENCH)1.51-6.35mm/0.061-0.250", 6940561971125
1 × $55.80 -
×
Insize 4112-BD75, INDIVIDUAL STEEL GAGE BLOCK, .75", grade AS-1, 6928640353659
1 × $28.68
-
×
3M 27680, Bristle Disc Mandrel, 3/32 in x 1/16 in, 7000046130
5 × $2.92 -
×
Insize 9407-P11, STYLI FOR 9407, H-2.953", d-.150"DIA, d1-.197"DIA, 6940561961584
1 × $165.95
-
×
Insize 3234-1, LARGE ANVIL MICROMETER, 0-1", 6928640382710
1 × $427.17
-
×
Insize 4112-CD1001, INDIVIDUAL STEEL GAGE BLOCK, .1001", grade AS-2, 6928640351563
1 × $20.62
-
×
Insize ISR-LS604E, SURFACE ROUGHNESS REFERENCE SPECIMENS, 31.5_in, 6940561934816
1 × $267.85
-
×
Insize 2187-225, ADJUSTABLE SNAP GAGE, 8.39-8.86", 6928640314650
1 × $782.43
-
×
3M 97419, Aluminum Foil Tape 3380, Silver, 48 mm x 45 m, 3.25 mil, 7000049613
24 × $18.86 -
×
Insize ISY-300, JIG SET FOR CMM (ANVIL .10DIA), 6940561974768
1 × $4,851.30
-
×
Insize 7110-150, STEEL RULE, 6"/150mm, 6928640319778
1 × $4.49
-
×
Insize 7110-600, STEEL RULE, 24"/600mm, 6928640319815
1 × $18.54
-
×
Insize ISR-RS530X, SURFACE ROUGHNESS REFERENCE SPECIMEN, 40_in/1.0_m, 6928640324628
1 × $717.44
-
×
Insize ISY-500-4, BLOCK, 6940561975017
1 × $111.60
-
×
Dynabrade 01185 Vane Set (4pk)
2 × $26.54 -
×
Insize ISR-CS333, SURFACE ROUGHNESS SPECIMEN, 6928640324512
1 × $328.01
-
×
Insize 1150-600E, DIGITAL HEIGHT GAGE, 0-24"/0-600mm, 6928640355332
1 × $1,000.00
-
×
Insize 4162-1626, PIN GAGE SET, 125pcs, .626~.750", 6928640396724
2 × $337.93
-
×
Insize ISR-SB60B, SMALL HOLE PROBE, 6928640324246
1 × $2,269.09
-
×
Dynabrade 18426 Vane Set (4pk)
1 × $20.20 -
×
Insize ISM-MAS100, METALLURGICAL ANALYSIS SOFTWARE AND CAMERA, 6928640349010
1 × $4,958.05
-
×
Dynabrade 96529 Tune-Up Kit for .7 hp Motor, Front and Rear Exhaust
1 × $131.67 -
×
Insize ISY-500-7, CLAMP HANDLE, 6940561975048
1 × $33.87
-
×
Insize ISY-200, JIG SET FOR CMM (ANVIL .10DIA), 6940561974690
1 × $4,175.87
Insize 3222-40, TUBULAR INSIDE MICROMETER, 2-40″, 6928640328725
$909.80
Graduation .001″
Accuracy: [.00005(3+n+L/2)]”, n=number of rods, L=maximum measuring length (inch).
Travel of micrometer head .5″
Supplied with setting standards.
Carbide measuring faces.
Related products
Measuring/ Inspection Instruments
Insize 1121-200B, DIGITAL INSIDE POINT CALIPER, 60-200mm/2.36-8″, type B, 6928640375668
$508.62
Measuring/ Inspection Instruments
$428.04
Measuring/ Inspection Instruments
Insize 1120-150AE, DIGITAL INSIDE GROOVE CALIPER, 1-6″/25.4-150mm, 6928640326608
$235.68
Measuring/ Inspection Instruments
Insize 1121-150B, DIGITAL INSIDE POINT CALIPER, 50-150mm/1.97-6″, type B, 6940561940077
$370.85
Measuring/ Inspection Instruments
$382.12