We developed this tape to be very well suited for light duty applications, including box closing, strapping, palletizing, box reinforcing and general bundling. The adhesive provides good initial adhesion and holds well with minimum rub-down. Our tough, clear film backing is abrasion and moisture resistant, provides good aging and protects the filaments and adhesive to help your boxes remain closed for long period of time. The backing, filaments and adhesive combine to provide high tensile and shear strength and also allow printing and illustrations to be seen through the tape. This tape gives you good holding under a wide range of application conditions with a minimum amount of tape, leading to lower cost for applications where high tensile strength is a main requirement.
Our line of filament-reinforced tapes and strapping tapes are high strength, reliable and affordable solutions that give you product and package integrity. For closing boxes, stabilizing pallets, bundling and reinforcing; securing appliance components during transport and easy-open tear strips, our high strength tapes provide important benefits for manufacturers of piping, metal products, furniture, appliances, automotive parts, sporting goods, as well as food and beverage processors.

Dynabrade X51HS 5" Dia. Non-Vacuum Dynorbital Extreme Random Orbital Sander
Dynabrade 53781 .7 hp Straight-Line Extension Die Grinder, Steel Housing, Rear Exhaust, 20,000 RPM, 1/4" Collet
Dynabrade 52373 4" (102 mm) Dia. Straight-Line Type 1 Wheel Grinder, 1 HP, 12,000 RPM, 3/8"-24 Spindle
Dynabrade 18734 O-Ring
Dynabrade 57064 Speed Regulator
Dynabrade 53681 Inlet Bushing
Dynabrade 90269 3" W x 10-11/16" L 220 Grit A/O DynaCut Belt, 10/pack
Dynabrade 96208 Repair-Collar Ass'y, 1.584" ID
Dynabrade 18433 Collet Insert, 1/4"
Dynabrade 52293 .7 hp 7 Degree Offset Die Grinder, Rear Exhaust, Short Shank, 18,000 RPM, 1/4" Collet
Dynabrade 11475 Dynabelter Abrasive Belt Tool, Standard Duty
Dynabrade 50471 Spring Holder
Dynabrade 79893 8" Dynacut 150 Grit Extreme Orange Scalloped Edge Discs, 25 per box
Dynabrade 58441 5" Dia. Two-Hand Gear-Driven Sander, Non-Vacuum, .45 HP, 900 RPM, Hook-Face Pad
Dynabrade 64402 36" W x 60" L (914 mm W x 1,524 mm L) Metal Capture Downdraft Table, 230 V (AC), Up Exhaust
Dynabrade 96197 Dowel Pin
Dynabrade 52379 4" (102 mm) Dia. Straight-Line Type 1 Extension Wheel Grinder, 1 HP, 12,000 RPM, 3/8"-24 Spindle
Dynabrade 52672 1 hp Straight-Line 6" (152 mm) Extension Die Grinder, Rear Exhaust, 3,400 RPM, 1/4" Collet
Dynabrade 78536 3" x 1/2", 1/4-20 Female Center Thread, 120 Grit, 8-Ply, Dynacut A/O Square Pad, 100/pack
Dynabrade 13205 Dynastraight Finishing Tool, .7 HP, Rear Exhaust, 3,400 RPM, 5/8" or 1" Dia. Arbor
Dynabrade 52434 3" (76 mm) Dia. Straight-Line Cut-Off Wheel Tool, Front Exhaust, .5 HP, 20,000 RPM, 3/8"-24 Spindle
Dynabrade 91705 DynaMesh 3" 220 Grit Hook & Loop Discs, 50 per box
Dynabrade 93339 Carbide Burr, 1/8" Dia., SA-43 D/C Burr, Cylinder, 9/16" Flute L, 1/8" Shank 
