-
×
3M 49938, Roloc Disc 361F, 80 YF-weight, TSM, 2 in, Die RS200PM, 7000119019
200 × $1.07 -
×
Standard Abrasives 722809, PSA A/O Extra Disc, 5 in x NH, 60, 7010368721
50 × $1.22 -
×
3M 90538, Replacement Pods for Banded Protector, 90538H2-DC, 2 pairs/pack, 10 packs/case, 7010376828
10 × $4.32 -
×
3M 97956, Super 77 CA Multipurpose Spray Adhesive, Low VOC <25%, Clear, 24 fl oz Can, 7100014109, 12/Case
12 × $18.57 -
×
Norton 69936606277 - 4" X 5/8" - 11, Carbon Steel Narrow Face Stringer Bead .0200" Knot Wire Wheel Brush, 5 per box
5 × $21.15 -
×
Norton 66623325038 - 3" 120 Grit Fine Grade Aluminum Oxide Vortex Rapid Prep, TR (Type III) Non-Woven Surface Preparation Disc, 25 Each
25 × $3.41 -
×
3M 45714, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 3 in x NH, D/F 3HL, Die 300BE, 7100113113
1 × $0.95 -
×
3M 28217, Cubitron II Roloc Disc 984F, 60+ YF-weight, TR, 3 in, Die R300V, 7010326790
200 × $1.95 -
×
3M 16580, Accuspray ONE Spray Gun System with Standard PPS, 7100099202
4 × $372.22 -
×
ACS CX1250 Diamond Belt, 1/2" X 24" 20u
12 × $7.60 -
×
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
500 × $0.74 -
×
3M™ 72010, Replacement Filter Kit 523-01-29, 7000056891, 1 EA/Case
1 × $553.91 -
×
3M 26109, PPS Series 2.0 Adapter, Type S23, 1/4 Female, 18 Thread NPS, 7100135941
4 × $27.52 -
×
3M 21511, Filter Adapter 502, 7000001931, 100 EA/Case
1 × $338.12 -
×
Standard Abrasives 32953, PSA A/O Disc, 711880, 2 in x NH, 60, 7010310798
100 × $0.00 -
×
3M 71361, 641WY 1/4" X 24", 1200 Mesh Diamond Cloth Belt, 7010534916
18 × $10.47
3M 03679, EMI Absorber AB7030HF, 210 mm x 297 mm, 7100078591
$76.20
Factory Stock, 7-10 Day Leadtime
3M EMI Absorber AB7000HF Series is an innovative EMI absorber material. This low-halogen, flexible, high-permeability magnetic EMI absorber sheet is a broadband absorber for near-field applications in the 50 MHz-10 GHz range.
Intended to reduce EMI and RF noise in electronic systems, 3M EMI Absorber AB7000HF Series consists of a flexible polymer resin loaded with soft metal flakes. It can be easily die-cut into complex shapes and has a backing thickness of 0.XX mm. It features a one-sided acrylic pressure-sensitive adhesive and can be applied to noisy traces, IC’s and reflective surfaces in an enclosure.
Related products
