-
×
Dynabrade 58660 8" Dual-Grip Gear Driven Sander for ESD
1 × $1,006.00 -
×
Dynabrade 55522 .3 hp Straight-Line, 3" Extended Die Grinder, Aluminum Housing 25,000 RPM, Rear Exhaust, 1/4" Collet
1 × $793.00 -
×
Dynabrade 61415 Raptor Vac, M-Class, 220 V- 240 V/50-60 Hz, 20 Gallon
1 × $2,663.32 -
×
Dynabrade 15300 Dynafile III Abrasive Belt Tool
1 × $940.00 -
×
Dynabrade 48503 2" Dia. 7 Degree Offset Disc Sander, Rear Exhaust, .4 HP, 25,000 RPM
1 × $473.00 -
×
Dynabrade 55541 .4hp, Right Angle Die Grinder, 20,000 RPM, Aluminum Housing, Rear Exhaust, 1/4" Collet
1 × $640.00 -
×
Dynabrade 52931 1/4" Drill, .4 HP, Rear Exhaust, 500 RPM
1 × $940.00 -
×
Dynabrade 47820 2" Dia. Right Angle Disc Sander, Front Exhaust, .4 HP, 12,000 RPM
1 × $696.00 -
×
Dynabrade 55581 .4hp Mini Right Angle Drill with Adjustable Angle Head, 2,400 RPM, Rear Exhaust, 1/4"-28 Thread
1 × $1,140.00 -
×
Dynabrade 55524 .3 hp Straight-Line, 3" Extended Die Grinder, Aluminum Housing 30,000 RPM, Rear Exhaust, 1/4" Collet
1 × $793.00 -
×
Dynabrade X62ESD 6" Dia. Central-Vacuum Dynorbital Extreme Random Orbital Sander for ESD
2 × $286.00 -
×
Dynabrade 55561 .7hp, Extended Right Angle Die Grinder, 18,000 RPM, Composite Housing, Rear Exhaust, 1/4" Collet
1 × $1,097.00 -
×
Dynabrade 55580 .4hp Mini Right Angle Drill with Adjustable Angle Head, 900 RPM, Rear Exhaust, 1/4"-28 Thread
2 × $1,230.00 -
×
Dynabrade 51700 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet
1 × $558.00 -
×
Dynabrade 64700 36" (91 cm) W x 72" (183 cm) L Downdraft Sanding Table, 115 V (AC)
1 × $5,914.69 -
×
Dynabrade 52850 0.1 hp Straight-Line Variable Speed Pencil Grinder, Rear Exhaust, 35-60,000 RPM, 1/8" Collet
1 × $697.00 -
×
3M 18825, Scotch-Brite EX3 Deburring Wheel, X3-WL, 9S Fine, 6 in x 1 in x 1 in, 7000120928
3 × $93.40
3M 73800, Masking Tape 2307, Tan, 96 mm x 55 m, 5.2 mil, 8 Roll/Case, 7000123726
$19.86
Factory Stock, 7-10 Day Leadtime
3M Masking Tape 2307 was formulated for general use, with a broad tack that will adhere to a variety of surfaces. The rubber adhesive sticks instantly with moderate strength. The crepe paper backing conforms over irregular surfaces and around corners while holding reliably. It is especially useful in woodworking and cabinet making applications.
Your Everyday Woodworking Tape
With easy tearability and resistance to slivering, 3M™ Masking Tape 2307 has proven to be an excellent choice for woodworking and cabinet applications. Using a rubber adhesive, this solvent-free tape holds well and removes cleanly in one piece. The easy unwind and simple tearability of this tape should help you get your project done quickly.
Recommended Applications
- Woodworking
- Cabinet Making
What is Masking Tape?
Masking tape was developed specifically to help protect surrounding surfaces from overspray, provide clean paint lines, and remove easily and cleanly when finished. Masking tapes from 3M adhere well, resist solvents or water from the paint, and are strong enough to hang plastic sheeting, yet remove cleanly without damaging the subsurface. The backing, typically crepe paper, can conform to curved and irregular surfaces. The tape hand tears for tool-free application.
