Ideal for Industrial Painting
Using our proprietary solvent-free adhesive, the tape sticks instantly to most surfaces, including metal, rubber, glass and plastic, as well as EPDM-type rubber moldings while removing cleanly in one piece. Our high-strength crepe-paper backing conforms to irregular surfaces, resists bleed through from most industrial paint systems, improves visibility during the paint masking process, and helps you achieve good paint lines.
3M Performance Yellow Masking Tape 301+ is an ideal tape for industrial painting, including two-tone color applications on trucks, buses, trailers, trains, fire trucks, ambulances and airplanes. It is easy to tear, which aids in handling, yet strong enough to resist slivering, providing “user friendly,” one piece removal. The tape is conformable for easy masking around corners, over contours and irregular surfaces.
Recommended Applications
Industrial paint masking
MRO applications
Woodworking and concrete
Bundling
Color coding
Sealing
Paint masking for mid-temperature paint processes
What is Masking Tape?
Masking tape was developed specifically to help protect surrounding surfaces from overspray, provide clean paint lines, and remove easily and cleanly when finished. Our masking tapes adhere well, resist solvents or water from the paint, and are strong enough to hang plastic sheeting, yet remove cleanly without damaging the subsurface. The backing, typically crepe paper, can conform to curved and irregular surfaces. The tape hand tears for tool-free application.
A masking tape should specify what surfaces it will stick to and the interval over which it will remove cleanly. A very thin or poorly manufactured tape may demonstrate splintering or shredding, either coming off the roll or when being removed after use. Some masking tapes have the tensile strength for light commercial and industrial applications, including bundling, labeling, sealing, temporary repairs, lane marking, splicing and surface protection. From wide to narrow, single rolls to bulk, there are many options to choose from when ordering masking tape. The classic crepe paper masking tape is a light tan color, but our masking tapes come in a variety of colors and formulations to meet general and specific applications. A roll of masking tape is a basic toolbox or supply room item in construction, warehousing, military, marine, shipping, automotive aftermarket, e-commerce, general manufacturing and retail industries.

Standard Abrasives 730099, Ceramic Full Taper Cartridge Roll, 1/2 in x 1-1/2 in x 1/8 in 60, 7100102856
Dynabrade 90875 2" Dia. Super Fine NWN DynaBrite Locking-Type Disc, 25/pack
Dynabrade 57332 Lock Ring
Dynabrade 78706 2" x 1/4"-20 Female Center Thread, Coarse, Dynabrite Surface Conditioning Eyelet Star, 50/pack
Dynabrade 53074 1/4" Right Angle Drill, .4 HP, Rear Exhaust, 5,000 RPM
Dynabrade 11074 Contact Wheel Ass'y, 5/8" Dia. x 1/8" W x 3/8" I.D., Crown Face, 70 Duro Rubber
Dynabrade 51812 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 1000,000 RPM, 3/32" Collet
Dynabrade 94300 1/4" NPT Composite Dynaswivel
Dynabrade 13504 Dynastraight Finishing Tool, 1 HP, Rear Exhaust, 3,400 RPM, 5/8"-11 Threaded Arbor
Dynabrade 54917 Bearing- 47 x 25 x 12
Dynabrade 57851 3-2/3" W x 7" L Non-Vacuum Dynabug Disc Pad, Hook-Face, Short Nap
Dynabrade 47202 .4 hp Straight-Line Die Grinder, Rear Exhaust, 5,000 RPM, 1/4" Collet
Dynabrade 40321 Dynafile II Abrasive Belt Tool Versatility Kit
Dynabrade 90040 5" Dia. Foam, Flat Face Polishing Pad
Dynabrade 90353 3-1/2" W x 15-1/2" L 60 Grit A/O DynaCut Belt, 10/ pack
Dynabrade 52632 4-1/2" Dia Right Angle Depressed Center Wheel Grinder, 1.3 HP, 12,000 RPM, 5/8"-11 Spindle
Dynabrade 54369 .7 hp Right Angle Die Grinder, Rear Exhaust, 12,000 RPM, 1/4" Collet
Dynabrade 91574 6" Dynacut Extreme Orange Premium Film Disc, 120 Grit, Hook & Loop, Non-Vacuum, 50/Box
Dynabrade 40750 Carbon Brush Set
Dynabrade 50014 3/8" (.375) Capacity Collet Sleeve 